Taperssection.com

Gear / Technical Help => Cables => Topic started by: Popmarter on April 22, 2015, 12:13:24 PM

Title: Nakamichi CM300 to M10: Need schematic for XLR to minijack
Post by: Popmarter on April 22, 2015, 12:13:24 PM
Hi, i got a standard xlr to minijack cable to connect the naks to the minijack (mic in) of a M10. But unfortunatly I am getting a hum. Probably has something to do with ground/shield or so. Does somebody have a schematic of how the wiring should be, so i can give that to my cablemaker?
Title: Re: Nakamichi CM300 to M10: Need schematic for XLR to minijack
Post by: tgakidis on April 22, 2015, 12:43:06 PM
Same concept but male xlrs

Tie pin 3 to ground

http://www.genelec.com/tech-tips/tech-tips-archive/1250-how-to-connect-an-audio-source-with-stereo-unbalanced-output-to-your-monitors-tip-10/
Title: Re: Nakamichi CM300 to M10: Need schematic for XLR to minijack
Post by: Popmarter on April 22, 2015, 01:13:19 PM
Thanks Ted, passing on the message  :D