Taperssection.com

Gear / Technical Help => Recording Gear => Topic started by: Elguapo511 on February 27, 2018, 03:14:01 PM

Title: 5V1A or 5V2.1A (Tascam Dr-2d + Battery Pack Questions)
Post by: Elguapo511 on February 27, 2018, 03:14:01 PM

I have an emergency  car starter battery pack that absolutely has never worked to start my car.

But it has two output options for USB to 5v 1a and 5v2.1A.

I though I would try it on my portable tascam.  But can't figure out which it is. 

Any help?

also, when searching for the correct usb chord.  What do I call the part that connects to tascam, the plug that is usually at the end of a wall wart.
Not sure the size, and the tascam manual only says    5v.   Im close... thanks for the help.

Title: Re: 5V1A or 5V2.1A (Tascam Dr-2d + Battery Pack Questions)
Post by: goodcooker on February 27, 2018, 03:38:46 PM

Here is the thread in remote power board

http://taperssection.com/index.php?topic=150794.0 (http://taperssection.com/index.php?topic=150794.0)

that has the power requirements and DC plug size for just about every recorder.
1 amp should be just fine.