Become a Site Supporter and Never see Ads again!

Author Topic: stand height  (Read 5738 times)

0 Members and 1 Guest are viewing this topic.

Offline dave

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 68
  • I'm a llama!
stand height
« on: October 23, 2003, 10:55:14 PM »
hi, i am wondering how a shorter stand( maybe eight, nine, or ten feet) would affect the sound of a recording in a larger venue like 10,000- 15000 or an arena.   thanks,
                                   dave

radioboy1977

  • Guest
  • Trade Count: (0)
Re:stand height
« Reply #1 on: October 23, 2003, 11:33:16 PM »
depends upon where you're recording from.

radioboy1977

  • Guest
  • Trade Count: (0)
Re:stand height
« Reply #2 on: October 23, 2003, 11:34:36 PM »
8 to 10 feet, however, should be good regardless of what kind of venue you're taping in.

radioboy1977

  • Guest
  • Trade Count: (0)
Re:stand height
« Reply #3 on: October 23, 2003, 11:36:17 PM »
also depends upon what kind of mic configuration you're using.  let us know the specifics & we'll be able to be more exact in suggestions.

Offline heath

  • Laugh it up, Fuzzball...
  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 24817
  • Gender: Male
  • I'm score!!!!!!
    • The Upstream Mend
Re:stand height
« Reply #4 on: October 23, 2003, 11:54:34 PM »
jefo, you just trying to pad your post count????   ;)
And the Sultans... yeah the Sultans play creole

 The Upstream Mend

radioboy1977

  • Guest
  • Trade Count: (0)
Re:stand height
« Reply #5 on: October 24, 2003, 12:39:16 AM »
no... train of thought derailed there for awhile.  it happens when you've been without sleep for almost 20 hours.  i should probably go to bed now ::)

Offline Lee

  • Team Bama
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4868
  • Gender: Male
  • "I hate the f***in' eagles, man!"
Re:stand height
« Reply #6 on: October 24, 2003, 02:29:06 AM »
I guess it's a matter of preference.  For most situations, I find myself running anywhere from 6.5 - 9 feet up.  To me, anything more than 10 feet is usually overkill, unless it's DMB and you need to be .002 microns from the stacks (been there, done that)
« Last Edit: October 24, 2003, 02:30:13 AM by Lee »
Denon AVR 3808ci > Paradigm Reference Studio 20 + Velodyne DLS 3750

Offline Sean Gallemore

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 8316
Re:stand height
« Reply #7 on: October 24, 2003, 06:18:54 AM »
he's just trying to multiply the phat sax

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18868
  • Gender: Male
Re:stand height
« Reply #8 on: October 24, 2003, 06:36:34 AM »
I guess it's a matter of preference.  For most situations, I find myself running anywhere from 6.5 - 9 feet up.

I also usually run 6-1/2 - 9 feet, but it's highly dependent on venue / soundsystem / crowd.  At one small venue in Cleveland, the Odeon, I run as high as I can - around 14' with my "big" stand - because it just plain sounds like ass otherwise.  Ideally, I'd run in the balcony, but they usually reserve the good spots up there for fanclubs and the like, if the balcony is even open.

'Course, this probably doesn't help because I don't tape much in massive arenas.
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

Offline Sean Gallemore

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 8316
Re:stand height
« Reply #9 on: October 24, 2003, 06:55:48 AM »
arenas *shivers*
actually, one of my better recordings came out of an arena,.  But it was astealth job and the mics  were head high....not sure what I'm trying to say, still schwilly......

Offline Kindguy

  • Team Bama
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 6390
  • Gender: Male
Re:stand height
« Reply #10 on: October 24, 2003, 07:40:55 AM »
The highest my stand will go is 9 ft.
TDS!

DPA 4023> aeta PSP-2> Apogee Mini Me > R-44

http://www.basicallyfrightened.com/

rabhan

  • Guest
  • Trade Count: (0)
Re:stand height
« Reply #11 on: October 24, 2003, 07:53:50 AM »
i used to run a bogen 3373 and it maxed with the mics at like 7.5ft. i now use a 3372 and i get closer to 8.75ft, altho i have never gotten out the tape to measure, i guess based on my head height and arm reach.

Offline 1st set only

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2115
  • Gender: Male
  • you are what you is
    • Don Poulsen Illustration and Graphic Design
Re:stand height
« Reply #12 on: October 24, 2003, 11:47:46 AM »
I saw a dude at the avalon for mike that had his stand at about nipple height. I didnt ask why but I thought it was odd. I think they were DPA mics
the show is over go home please.

Offline Lee

  • Team Bama
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4868
  • Gender: Male
  • "I hate the f***in' eagles, man!"
Re:stand height
« Reply #13 on: October 24, 2003, 02:23:40 PM »
I saw a dude at the avalon for mike that had his stand at about nipple height. I didnt ask why but I thought it was odd. I think they were DPA mics

In this case, FOB = Front of Boobies :wink2:
Denon AVR 3808ci > Paradigm Reference Studio 20 + Velodyne DLS 3750

Offline heath

  • Laugh it up, Fuzzball...
  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 24817
  • Gender: Male
  • I'm score!!!!!!
    • The Upstream Mend
Re:stand height
« Reply #14 on: October 24, 2003, 02:29:29 PM »
nice.... +T lee
And the Sultans... yeah the Sultans play creole

 The Upstream Mend

 

RSS | Mobile
Page created in 0.082 seconds with 43 queries.
© 2002-2024 Taperssection.com
Powered by SMF