Topic: NM-30 (avlex) - need an alternative......

[OhioHead]

The Avlex NM-30 shock mount was highly recommended for Brian's (it goes to eleven) CA-14 bar......spoken w/ my local Avlex reseller today, the Avlex is back ordered a minimum of 5 weeks b/c of the west longshoreman strike.......pretty confident Brian's bar is 20mm thick, need a well made & quick to procure shock mount.  I know so folks make mounts onTS, please recommend......

This will be double posted under the mic section.

[larrysellers]

You want this ---> http://www.bhphotovideo.com/c/product/68622-REG/Shure_A53M_A53M_Isolation_and_Swivel.html .

[OhioHead]

Thank you, this could work (can't tell what holds the bar in place?)!

[greenmtnsrider]

Brian provided me with a foam piece that held the bar inside of a 20mm shockmount. The bar itself is very slim, the foam gets everything seated nicely.

Im using an HM-30 mount, which you can purchase here: http://www.superlux.us/smalldiaphragm.html

[OhioHead]

Awesome info below!

Ordered 2 of the Shure mount from a local shop on Monday (1 mount for each bar), I will use foam if the bar is loose.

Brian provided me with a foam piece that held the bar inside of a 20mm shockmount. The bar itself is very slim, the foam gets everything seated nicely.

Im using an HM-30 mount, which you can purchase here: http://www.superlux.us/smalldiaphragm.html