Become a Site Supporter and Never see Ads again!

Author Topic: Star Quad Custom made cable  (Read 2268 times)

0 Members and 1 Guest are viewing this topic.

Offline ricola

  • Trade Count: (1)
  • Taperssection Newbie
  • *
  • Posts: 30
Star Quad Custom made cable
« on: December 14, 2015, 05:13:36 PM »
Hello folks,
I need a special cable for my Stereo mic to minimise noise interference by using two twisted cores (Star Quad Cable for Example Canare or Van Damme).

It is a (1) 5pin XLR split to (2) 3pin XLR adapter cable like this but used with that special Star Quad cable.
http://www.canford.co.uk/CANFORD-XLR-XLR-Y-LEADS-5-PIN-TO-DUAL-3-PIN


I still have this terrible cell noises (HF noises) in many of my recordings. So I think to use a Stare Quad cable is the ONLY way to eliminate this noises.

My Question: is there any experienced guy out here who can soldering me such a custom made cable of about 50cm length??

Thanks and greetings from Germany
ricola

Offline aaronji

  • Site Supporter
  • Trade Count: (9)
  • Needs to get out more...
  • *
  • Posts: 3861
Re: Star Quad Custom made cable
« Reply #1 on: December 14, 2015, 05:22:46 PM »
Try tgakidis (http://taperssection.com/index.php?topic=133186.0) or darktrain (http://taperssection.com/index.php?topic=110932.0).  They can make just about any cable you might need...

Offline OhioHead

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 276
Re: Star Quad Custom made cable
« Reply #2 on: December 14, 2015, 05:24:50 PM »
Serious question, how close is your cell phone to your gear & do your recordings not have interference when you leave the cell @ home?

Offline TSNéa

  • Trade Count: (6)
  • Taperssection Regular
  • **
  • Posts: 164
Re: Star Quad Custom made cable
« Reply #3 on: December 14, 2015, 10:03:32 PM »

Offline John Willett

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1550
  • Gender: Male
  • Bio:
    • Sound-Link ProAudio
Re: Star Quad Custom made cable
« Reply #4 on: December 18, 2015, 04:48:09 AM »
Hello folks,
I need a special cable for my Stereo mic to minimise noise interference by using two twisted cores (Star Quad Cable for Example Canare or Van Damme).

It is a (1) 5pin XLR split to (2) 3pin XLR adapter cable like this but used with that special Star Quad cable.
http://www.canford.co.uk/CANFORD-XLR-XLR-Y-LEADS-5-PIN-TO-DUAL-3-PIN


I still have this terrible cell noises (HF noises) in many of my recordings. So I think to use a Stare Quad cable is the ONLY way to eliminate this noises.

My Question: is there any experienced guy out here who can soldering me such a custom made cable of about 50cm length??

Thanks and greetings from Germany
ricola

Canford Audio will make it for you.

Urder the cable from their website, order the connectors (in your case I would use the Neutrik EMC ones) and Canford Audio will make the can=ble to whatever length you require.

It's an excellent service and I have used it myself several times.

 

RSS | Mobile
Page created in 0.055 seconds with 31 queries.
© 2002-2024 Taperssection.com
Powered by SMF