Become a Site Supporter and Never see Ads again!

Author Topic: 15mm shockmount ??  (Read 2302 times)

0 Members and 1 Guest are viewing this topic.

Offline kindms

  • Trade Count: (6)
  • Needs to get out more...
  • *****
  • Posts: 5950
    • The Breakfast
15mm shockmount ??
« on: July 24, 2018, 07:21:41 PM »
So I have to give credit to Hypnocracy as he mentioned the 15mm stuff the rig pictures thread. So i followed his links and it sent me down the rabbit hole of 15mm camera stuff.

I wanted to see if I could get a split omni bar that would break down and fit in my bag etc so not to have to carry the huge manfrotto for most shows

So I finally got most of the parts i ordered and I think it is going to work very well for my actives. current design idea is like this

clamp---------------shock-----------------clamp

Anyone know a shockmount that will take such a small diameter ?

what I have now is pretty cool. Its 4 sections 12" each and 2 really small clamps on the ends. So it will break down to 4 x 12" and they are super light but strong enough for the actives +

AKG c426, AKG414 XLS/ST, AKG ck61, ck22, >nBob colettes >PFA > V3, SD MixPre >  TCM-Mod Tascam HDP2, Sony M10
Little Bear tube Pre >Outlaw Audio 2200 Monoblocks > VR-2's

Offline heathen

  • Trade Count: (23)
  • Needs to get out more...
  • *****
  • Posts: 3528
Re: 15mm shockmount ??
« Reply #1 on: July 24, 2018, 08:23:50 PM »
This can hold the 12 mm Tetramic shaft: https://www.adorama.com/ry041120.html

Not sure if it would be too tight for your 15 mm bar though.
Mics: AT4050ST | AT4031 | AT853 (C/SC) | Line Audio CM3 | Sennheiser e614 | Sennheiser MKE2 | DPA 4061 Pre: CA9200 Decks: Zoom F8 | Roland R-05

Offline kindms

  • Trade Count: (6)
  • Needs to get out more...
  • *****
  • Posts: 5950
    • The Breakfast
Re: 15mm shockmount ??
« Reply #2 on: July 25, 2018, 12:54:23 PM »
This can hold the 12 mm Tetramic shaft: https://www.adorama.com/ry041120.html

Not sure if it would be too tight for your 15 mm bar though.

Thanks for the link

It helped me find this

https://www.bhphotovideo.com/c/product/1050990-REG/rycote_041130_portable_recorder_shockmount_hg.html

Which a little pricey I think will work perfectly for my project
AKG c426, AKG414 XLS/ST, AKG ck61, ck22, >nBob colettes >PFA > V3, SD MixPre >  TCM-Mod Tascam HDP2, Sony M10
Little Bear tube Pre >Outlaw Audio 2200 Monoblocks > VR-2's

Offline heathen

  • Trade Count: (23)
  • Needs to get out more...
  • *****
  • Posts: 3528
Re: 15mm shockmount ??
« Reply #3 on: July 25, 2018, 01:00:32 PM »
It helped me find this

https://www.bhphotovideo.com/c/product/1050990-REG/rycote_041130_portable_recorder_shockmount_hg.html

Which a little pricey I think will work perfectly for my project

I have that mount.  I haven't used it much, and don't know that I will in the future.  If you want to save some money I could sell you mine.  Just let me know via PM.
Mics: AT4050ST | AT4031 | AT853 (C/SC) | Line Audio CM3 | Sennheiser e614 | Sennheiser MKE2 | DPA 4061 Pre: CA9200 Decks: Zoom F8 | Roland R-05

 

RSS | Mobile
Page created in 0.066 seconds with 33 queries.
© 2002-2024 Taperssection.com
Powered by SMF