Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: Building AKG ck91 actives - Questions on making cables  (Read 2319 times)

0 Members and 1 Guest are viewing this topic.

Offline TheMaestro

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 114
  • Gender: Male
Building AKG ck91 actives - Questions on making cables
« on: September 14, 2008, 03:36:20 PM »
Well, I've purchased a pair of ck91s with the intent to run them into my three wire CA-9100.

Does someone know the standard wiring of the mini xlr connector?

I'm planning to use Canare L-4E5C Miniature Star-Quad for the cable.  The outer diameter is .189in, would this work with ta3f mini xlr?

http://www.cs.uwaterloo.ca/~mannr/AKG/CK91_conn_set.pdf this shows the connection in the mic.  Would this line up with the standard 3 wire wiring?

If I want to make some unbalanced interconnects would the Canare L-4E5C Miniature Star-Quad be suitable?  Like a 1/8 to 1/8 mini jack interconnect?

I would also like to use techflex on the cables.  Could anyone recommend a size?

Any recommendations on shrink tubing?

I'd like to purchase everythink from one place.  I'm thinking markertek.

Thanks,

Trenton
Logged
Venue Security: Let me see your identification.
TheMaestro: [with a small wave of his hand] You don't need to see his identification.
Venue Security: We don't need to see his identification.
TheMaestro: This isn't the recording equipment you're looking for.
Venue Security: This isn't the recording equipment we're looking for.
TheMaestro: He can go about his business.
Venue Security: You can go about your business.
TheMaestro: Move along.
Venue Security: Move along... move along.

Offline TheMaestro

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 114
  • Gender: Male
Re: Building AKG ck91 actives - Questions on making cables
« Reply #1 on: September 20, 2008, 12:07:38 PM »
bip bip ::)
Logged
Venue Security: Let me see your identification.
TheMaestro: [with a small wave of his hand] You don't need to see his identification.
Venue Security: We don't need to see his identification.
TheMaestro: This isn't the recording equipment you're looking for.
Venue Security: This isn't the recording equipment we're looking for.
TheMaestro: He can go about his business.
Venue Security: You can go about your business.
TheMaestro: Move along.
Venue Security: Move along... move along.

Offline boojum

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3629
  • Gender: Male
Re: Building AKG ck91 actives - Questions on making cables
« Reply #2 on: September 25, 2008, 01:32:03 AM »
The mini-XLR's that I have are from Switchcraft, and they live at switchcraft.com.  They are wired just like the big guys because guys like me are too dumb to learn another way.  If you go to the home page and find this page (TINI Q-G® MINIATURE CONNECTORS) you will have the pictures you need.

Cheers, and a steady hand.
 


Logged
Nov schmoz kapop.
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.25 seconds with 31 queries.
© 2002-2024 Taperssection.com
Powered by SMF