Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: caymanreview on July 14, 2003, 06:21:52 PM

Title: taping at bonner springs
Post by: caymanreview on July 14, 2003, 06:21:52 PM

havent been there since 6-30-99 phish, and i will be going there thursday to tape phish

il be running Akg 391's > PS2 > Hosa MIT-176 Transformers w/ rca upgrade > ModSbm1 > M1

anyone have any thoughts about mic placement at this particular venue/band, as i have never taped phish before now

thanks

Title: Re:taping at bonner springs
Post by: Tim on July 14, 2003, 07:42:51 PM

I always like DIN with the 391's... maybe at 100* since there is no roof or sides to the place.

I'll be there... come by and say hello. weather permitting I'll be running split omni's

Title: Re:taping at bonner springs
Post by: caymanreview on July 15, 2003, 07:23:45 AM

looks like i may not have the taper tix i thought i had... the kid wont reply that was gonna trade my pavillions, 22nd row a little right of center, for his tapers

i had all my new gear ups'ed next day and it cost me 90 bucks extra... this sucks

whats the situation with stub n' carry for phish, would i be able to get into the section and tape?

Title: Re:taping at bonner springs
Post by: mterry on July 15, 2003, 08:27:32 AM

This isn't good

Title: Re:taping at bonner springs
Post by: RRobar on July 15, 2003, 08:44:27 AM

Get a stand clamp and you should have no worries. SOmeone will help you bring it in. I'm having to do it for 1 ALpine and 2 Deer Creeks. and I don't think it will be an issue.

good luck and have fun. I'd also say give DIN a try.

Title: Re:taping at bonner springs
Post by: mterry on July 15, 2003, 09:05:17 AM

it's a different story when you run a laptop and don't have any clamps.......haha