Become a Site Supporter and Never see Ads again!

Author Topic: Elementary question: Cable ties  (Read 10136 times)

0 Members and 1 Guest are viewing this topic.

Offline acidjack

  • Site Supporter
  • Trade Count: (37)
  • Needs to get out more...
  • *
  • Posts: 5845
  • Gender: Male
Elementary question: Cable ties
« on: November 23, 2009, 12:00:10 PM »
I'm a little embarassed to ask such a basic question, but I searched "cable ties" and didn't see a good answer.  What do people use to secure cables to their stand?  I've got some of those velcro cable ties where you have to thread it together, and don't really like that - it never gets tight enough and is a bitch to use in the dark.  I've seen some big Shure ones on stands, but googling "Shure cable ties" doesn't seem to get it.  I've just been using small bits of tape, but that is a pain for a variety of reasons, and it looks crappy.

What do people like? 
Mics: Schoeps MK4V, MK41V, MK5, MK22> CMC6, KCY 250/5, KC5, NBob; MBHO MBP603/KA200N, AT 3031, DPA 4061 w/ d:vice, Naiant X-X, AT 853c, shotgun, Nak300
Pres/Power: Aerco MP2, tinybox v2  [KCY], CA-UBB
Decks: Sound Devices MixPre 6, Zoom F8, M10, D50

My recordings on nyctaper.com: http://www.nyctaper.com/?tag=acidjack | LMA: http://www.archive.org/bookmarks/acidjack | twitter: http://www.twitter.com/acidjacknyc | Soundcloud: https://soundcloud.com/acidjacknyc

Offline flipp

  • resident curmudgeon
  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 4285
Re: Elementary question: Cable ties
« Reply #1 on: November 23, 2009, 12:06:13 PM »
On my APIC extension pole I like to use Windtech cable clamps http://windtech.ws/miscellaneous.html but on my stand they are too small. My bicycle has something very similar but made of metal to hold the brake and shift cables but I haven't been to my local bicycle shop to see if they would work on my stand.                         
« Last Edit: November 23, 2009, 12:07:46 PM by flipp »

Offline acidjack

  • Site Supporter
  • Trade Count: (37)
  • Needs to get out more...
  • *
  • Posts: 5845
  • Gender: Male
Re: Elementary question: Cable ties
« Reply #2 on: November 23, 2009, 01:54:26 PM »
On my APIC extension pole I like to use Windtech cable clamps http://windtech.ws/miscellaneous.html but on my stand they are too small. My bicycle has something very similar but made of metal to hold the brake and shift cables but I haven't been to my local bicycle shop to see if they would work on my stand.                         
Thanks!  Hadn't thought of that, but that looks like it should do the trick.
Mics: Schoeps MK4V, MK41V, MK5, MK22> CMC6, KCY 250/5, KC5, NBob; MBHO MBP603/KA200N, AT 3031, DPA 4061 w/ d:vice, Naiant X-X, AT 853c, shotgun, Nak300
Pres/Power: Aerco MP2, tinybox v2  [KCY], CA-UBB
Decks: Sound Devices MixPre 6, Zoom F8, M10, D50

My recordings on nyctaper.com: http://www.nyctaper.com/?tag=acidjack | LMA: http://www.archive.org/bookmarks/acidjack | twitter: http://www.twitter.com/acidjacknyc | Soundcloud: https://soundcloud.com/acidjacknyc

Offline kcmule

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 3159
  • Gender: Male
Re: Elementary question: Cable ties
« Reply #3 on: November 23, 2009, 02:28:05 PM »
I'm a little embarassed to ask such a basic question, but I searched "cable ties" and didn't see a good answer.  What do people use to secure cables to their stand?  I've got some of those velcro cable ties where you have to thread it together, and don't really like that - it never gets tight enough and is a bitch to use in the dark.  I've seen some big Shure ones on stands, but googling "Shure cable ties" doesn't seem to get it.  I've just been using small bits of tape, but that is a pain for a variety of reasons, and it looks crappy.

What do people like?

Threaded velcro ties?  Guess I don't know what you are talking about.
The ones I have are just a velcro strap.  They work fine.

Offline acidjack

  • Site Supporter
  • Trade Count: (37)
  • Needs to get out more...
  • *
  • Posts: 5845
  • Gender: Male
Re: Elementary question: Cable ties
« Reply #4 on: November 23, 2009, 02:52:33 PM »
I'm a little embarassed to ask such a basic question, but I searched "cable ties" and didn't see a good answer.  What do people use to secure cables to their stand?  I've got some of those velcro cable ties where you have to thread it together, and don't really like that - it never gets tight enough and is a bitch to use in the dark.  I've seen some big Shure ones on stands, but googling "Shure cable ties" doesn't seem to get it.  I've just been using small bits of tape, but that is a pain for a variety of reasons, and it looks crappy.

What do people like?

Threaded velcro ties?  Guess I don't know what you are talking about.
The ones I have are just a velcro strap.  They work fine.

The ones I purchased have a small cut in one end, so you have to thread the small strap through the cut (like a belt) and then pull it back. It never secures well and is kind of a mess.  I'm sure there are better velcro straps...
Mics: Schoeps MK4V, MK41V, MK5, MK22> CMC6, KCY 250/5, KC5, NBob; MBHO MBP603/KA200N, AT 3031, DPA 4061 w/ d:vice, Naiant X-X, AT 853c, shotgun, Nak300
Pres/Power: Aerco MP2, tinybox v2  [KCY], CA-UBB
Decks: Sound Devices MixPre 6, Zoom F8, M10, D50

My recordings on nyctaper.com: http://www.nyctaper.com/?tag=acidjack | LMA: http://www.archive.org/bookmarks/acidjack | twitter: http://www.twitter.com/acidjacknyc | Soundcloud: https://soundcloud.com/acidjacknyc

Offline kcmule

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 3159
  • Gender: Male
Re: Elementary question: Cable ties
« Reply #5 on: November 23, 2009, 02:53:49 PM »
I guess mine are like that also, just don't use them that way.
Don't really see the point in "threading" them.

Offline page

  • Trade Count: (25)
  • Needs to get out more...
  • *****
  • Posts: 8388
  • Gender: Male
  • #TeamRetired
Re: Elementary question: Cable ties
« Reply #6 on: November 23, 2009, 03:09:47 PM »
I thread mine. I use them purely to keep the cord near the stand is all. Is there any particular reason why you want to cinch them up tight? Just curious.
"This is a common practice we have on the bus; debating facts that we could easily find through printed material. It's like, how far is it today? I think it's four hours, and someone else comes in at 11 hours, and well, then we'll... just... talk about it..." - Jeb Puryear

"Nostalgia ain't what it used to be." - Jim Williams

Offline yug du nord

  • ...til things never seen seem familiar…
  • Trade Count: (56)
  • Needs to get out more...
  • *****
  • Posts: 5533
  • made with natural flavor
Re: Elementary question: Cable ties
« Reply #7 on: November 23, 2009, 03:20:09 PM »
I use the velcro belt-style ties....  got em at Target...  3M brand....  work just fine.  But if I lose a few and am in a pinch, twist ties from a loaf of bread or something work just as well....  I always keep some twist ties in my bag.
.....got a blank space where my mind should be.....

Offline page

  • Trade Count: (25)
  • Needs to get out more...
  • *****
  • Posts: 8388
  • Gender: Male
  • #TeamRetired
Re: Elementary question: Cable ties
« Reply #8 on: November 23, 2009, 03:21:33 PM »
I use the velcro belt-style ties....  got em at Target...  3M brand....  work just fine.  But if I lose a few and am in a pinch, twist ties from a loaf of bread or something work just as well....  I always keep some twist ties in my bag.

I've done that too.
"This is a common practice we have on the bus; debating facts that we could easily find through printed material. It's like, how far is it today? I think it's four hours, and someone else comes in at 11 hours, and well, then we'll... just... talk about it..." - Jeb Puryear

"Nostalgia ain't what it used to be." - Jim Williams

Offline jeromejello

  • Team Florida - always brings the heat
  • Trade Count: (9)
  • Needs to get out more...
  • *****
  • Posts: 3514
  • Gender: Male
  • surly tapir
Re: Elementary question: Cable ties
« Reply #9 on: November 23, 2009, 06:04:24 PM »
the ones i have can be threaded.  but if i thread them, it is on the cable, and then wrap it to the stand.

typically, unless i have plenty of time to kill and its my stand, i dont thread the stand OR the cable... just wrap it up... i have been able to do this in the dark and drunk very well...
open: mbho 603a (ka200n/ka500hn) > SD MP-2 > PCM-M10
stealth: AT853a (o/sc/c/h) > SD MP-2 > ihp120
misc: Earthworks SR77 | Shure VP88

bt & dime

Offline mosquito

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 170
  • I am the Bug!
Re: Elementary question: Cable ties
« Reply #10 on: November 25, 2009, 06:04:57 AM »
I've never had a problem with my velcro-type strips, but I've also used electrical tape, twist ties 'helixed' them around the stand and found items.  Whether or not I use something depends on the venue and crowd: more casual and less crowded means I often won't use them.

Offline ArchivalAudio

  • Trade Count: (19)
  • Needs to get out more...
  • *****
  • Posts: 2891
  • Gender: Male
  • Teams Milab | MBHO | TeamVW:2011 Touareg TDI
Re: Elementary question: Cable ties
« Reply #11 on: December 02, 2009, 09:58:59 PM »
I use the velcro ties,  and thread them to my cables, so when I coil them up I can keep the cable knot free. I also use them a bit to wrap around the stand - they also stick well to the carpet of many PA speakers, or stages.
however to secure it to my stand after ,my cables are plugged in, I do a quick wrap around the stand with a twist. this works great, no need for velcro, and if you need to lower that stand you don't have the ties slowing you down.

--Ian
~ Archival Audio ~
Archiving Worthy Music
since 1986 & digitally since 1995

https://www.facebook.com/ArchivalAudio/

Main Mics: Milab VM-44 Links • Milab DC-196's (Matched  Pair)  • MBHO KA500 or KA300 •
PreAmps:  BaybNbox  • Naiant LittleBox • Naiant [Milab VM44] TinyBox • Naiant PIPsqueak
Recorders: MixPre 10T •  Tascam DR-100 mkIII • Sony A-10 • Sony M-10 

macMini 3Ghz i7 16GB Ram 500GB SSD • MOTU UltraLite
Naiant MSH-2's •   TOA K1's • Beyer TG 153c's •  AT 853 (4.7kmod darktrain) • Countryman B3's (1 k mod)  + other assorted mics

Offline jlykos

  • Trade Count: (6)
  • Needs to get out more...
  • *****
  • Posts: 4416
  • Gender: Male
  • Don't sweat the technique
Re: Elementary question: Cable ties
« Reply #12 on: December 08, 2009, 10:41:45 AM »
They sell rolls of double-sided velcro at Michael's (the craft store).  I think that it costs something like $8 per roll, but you get yards of the stuff.  Just cut off as much as you want and you are good.
dpa 4061 > Church Audio 9200 > Sony PCM-D50 (Moon Audio Silver Dragon v3 interconnect)

"I have no views," Mickey Melchiondo, known as Dean Ween, said in a philosophical moment. "I am way too stupid. I have no strong feelings about anything. I'm really into television and the computer. I believe everything I see on TV and read on the Internet."

Offline notlance

  • Trade Count: (6)
  • Taperssection Member
  • ***
  • Posts: 695
  • Gender: Male
Re: Elementary question: Cable ties
« Reply #13 on: December 08, 2009, 05:42:31 PM »
I like these cable ties:

http://www.amazon.com/Velcro-Reusable-Self-Gripping-Inches-91140/dp/B001E1Y5O6

These are 8" long which is long enough for a 50' mic cable.  If you need a longer tie, you can daisy chain two or more together.  They are cheap and 100 of them may last you your lifetime.  Amazon has as good a price as anyone, if you get the "free" shipping.

Offline splumer

  • Trade Count: (2)
  • Taperssection All-Star
  • ****
  • Posts: 1192
  • Gender: Male
  • Go ahead, try this at home
Re: Elementary question: Cable ties
« Reply #14 on: December 28, 2009, 02:21:53 PM »
You can get Velcro cable ties at Home Depot. I use them on my cables to keep them coiled, but on my stand I often use these spring-loaded hair claw things my wife uses in her hair. (When she's not using them  :D ) They're small, 1" or so, and the hold the cable tight enough that it takes the weight off the mics.
"Forget Jesus, the stars died so you could be here. "
 - Lawrence Krauss

 

RSS | Mobile
Page created in 0.156 seconds with 44 queries.
© 2002-2024 Taperssection.com
Powered by SMF