Taperssection.com

Gear / Technical Help => Remote Power => Topic started by: jasonw on September 10, 2006, 09:58:58 PM

Title: UA-5 powering through a VRbox
Post by: jasonw on September 10, 2006, 09:58:58 PM

Ok....so do i need to worry about all this reverse polarity or will the cables that I received when I bought the VR box already work?

Title: Re: UA-5 powering through a VRbox
Post by: willndmb on September 10, 2006, 10:08:27 PM

who madfe th vr box?
if its a bumblebee or toddr you SHOULD be fine
if they knew it was being used with a u5a when it was made you will be fine for sure
my vr box has the tip marked with a marker showing its polarity is reversed

Title: Re: UA-5 powering through a VRbox
Post by: jasonw on September 12, 2006, 09:03:41 AM

its a bumblebee

Title: Re: UA-5 powering through a VRbox
Post by: willndmb on September 12, 2006, 01:04:49 PM

Quote from: jasonw on September 12, 2006, 09:03:41 AM

its a bumblebee

then the only think you need to make sure is it was made for a ua5/jb3 and not a v3 or something else
if it was made for a ua5 then the cable will be right, you will know this - if you don't already - by if the plug even fits the ua5