Become a Site Supporter and Never see Ads again!

Author Topic: What do I need to test my used 9 volts?  (Read 3620 times)

0 Members and 1 Guest are viewing this topic.

Offline Diamond_D

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 281
  • Gender: Male
  • Who's not honoring me now?
What do I need to test my used 9 volts?
« on: May 10, 2005, 10:52:37 PM »
forgive the dopey question, but I am not all that familiar with the more electronic side of the gear. I am using 9V alkalines in my PS-2 and AD-20, and I'm sure I can get about 3 shows out of them, but I'm not willing to take a chance and start a new show with a battery that may not necessarily make it through. Of course, I'm sick of throwing away batteries that most likely could do another show.

How would I test the 9V to see if they have enough juice left? Would a cheap rat shack multimeter (like this) do the trick? And then from there I guess I could see what voltage triggers the low batter light, and just make sure I'm well above before starting a show? Thanks!!
SP-C4's > Canare Star Quads > UA5 (bm2p+) > H120

"Drums, Guitars, and Death. They finally got it right."
        Beavis & Butthead

Offline admkrk

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1743
  • I'm an idiot
Re: What do I need to test my used 9 volts?
« Reply #1 on: May 10, 2005, 11:35:54 PM »
forgive the dopey question, but I am not all that familiar with the more electronic side of the gear. I am using 9V alkalines in my PS-2 and AD-20, and I'm sure I can get about 3 shows out of them, but I'm not willing to take a chance and start a new show with a battery that may not necessarily make it through. Of course, I'm sick of throwing away batteries that most likely could do another show.

How would I test the 9V to see if they have enough juice left? Would a cheap rat shack multimeter (like this) do the trick? And then from there I guess I could see what voltage triggers the low batter light, and just make sure I'm well above before starting a show? Thanks!!

yep.

or better yet, ditch the alkys and get a rc deal. i think it's about the same price, and no more batts to buy.
"the faster you go ahead, the behinder you get"

"If you can drink ram's piss, fuck, you can drink anything"

Offline Diamond_D

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 281
  • Gender: Male
  • Who's not honoring me now?
Re: What do I need to test my used 9 volts?
« Reply #2 on: May 10, 2005, 11:49:58 PM »
yeah I was thinking about that, but they're not all that expensive in bulk, and for an inexperienced dude like me, it seems there's a large enough chance of me frying something to make it not worth it.
SP-C4's > Canare Star Quads > UA5 (bm2p+) > H120

"Drums, Guitars, and Death. They finally got it right."
        Beavis & Butthead

Offline admkrk

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1743
  • I'm an idiot
Re: What do I need to test my used 9 volts?
« Reply #3 on: May 11, 2005, 12:06:07 AM »
i don't think you need to worry about frying anything. i had the same concerns when i built my ps for the mx-100. if i used it more, i'd definatly go the rc route. not sure if i could run it and the art pII off the same batt or if i'd need two?

as far as the almost dead batts go, you got friends that could use them in a radio or something? maybe even could get them to trade a new set for so many not so new?  just an idea.
"the faster you go ahead, the behinder you get"

"If you can drink ram's piss, fuck, you can drink anything"

Offline Lil Kim Jong-Il

  • Trade Count: (6)
  • Needs to get out more...
  • *****
  • Posts: 6498
  • large Marge sent me
Re: What do I need to test my used 9 volts?
« Reply #4 on: May 16, 2005, 04:50:02 PM »
RadioShack sells (or did sell) inexpensive battery testers. 

Although, I'd rather see you go with a rechargable solution.  You'll save money and the landfill will grow just a little more slowly.
The first rule of amateur neurosurgery club is .... I forget.

Offline The Kilted Taper

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2344
  • Gender: Male
  • Real men wear kilts.
Re: What do I need to test my used 9 volts?
« Reply #5 on: May 16, 2005, 04:51:31 PM »
We were all born with a great 9v tester, your tongue!  ;) ;D
"The guy who's been dissed, dismissed and demoted so often that he should have officially changed his first name to "Backup." "

Offline admkrk

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1743
  • I'm an idiot
Re: What do I need to test my used 9 volts?
« Reply #6 on: May 16, 2005, 05:07:19 PM »
We were all born with a great 9v tester, your tongue!  ;) ;D

 ;D
"the faster you go ahead, the behinder you get"

"If you can drink ram's piss, fuck, you can drink anything"

Offline Diamond_D

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 281
  • Gender: Male
  • Who's not honoring me now?
Re: What do I need to test my used 9 volts?
« Reply #7 on: May 16, 2005, 06:00:16 PM »
RadioShack sells (or did sell) inexpensive battery testers. 

Although, I'd rather see you go with a rechargable solution.  You'll save money and the landfill will grow just a little more slowly.

Went to The Shack over the weekend and got a nice middle of the line multimeter, will be useful for taping and setting up speaker stuff, etc. Come summertime, I will make myself a nice setup with some of the RC Car 9V packs. Can one of you answer my question about voltages on the other thread? THanks :) :)
SP-C4's > Canare Star Quads > UA5 (bm2p+) > H120

"Drums, Guitars, and Death. They finally got it right."
        Beavis & Butthead

Offline Lil Kim Jong-Il

  • Trade Count: (6)
  • Needs to get out more...
  • *****
  • Posts: 6498
  • large Marge sent me
Re: What do I need to test my used 9 volts?
« Reply #8 on: May 16, 2005, 09:56:26 PM »
Can one of you answer my question about voltages on the other thread? THanks :) :)

which thread?
The first rule of amateur neurosurgery club is .... I forget.

Offline admkrk

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1743
  • I'm an idiot
Re: What do I need to test my used 9 volts?
« Reply #9 on: May 16, 2005, 10:23:39 PM »
Can one of you answer my question about voltages on the other thread? THanks :) :)

which thread?

i think he means this one.   and i can't answer, it's all greek to me.
"the faster you go ahead, the behinder you get"

"If you can drink ram's piss, fuck, you can drink anything"

 

RSS | Mobile
Page created in 0.076 seconds with 38 queries.
© 2002-2024 Taperssection.com
Powered by SMF