Become a Site Supporter and Never see Ads again!

Author Topic: UA5 3 mic mix....  (Read 8827 times)

0 Members and 1 Guest are viewing this topic.

jessedscott

  • Guest
  • Trade Count: (0)
Re:UA5 3 mic mix....
« Reply #15 on: June 24, 2003, 10:53:31 AM »
YES,and YES!!! you were soooo right this is PHUN!! sooo easy to do to....

Offline BCostigan

  • I can resist everything except temptation
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 3691
  • Gender: Male
  • Loose Lucy is my delight
    • GranitePhotography
Re:UA5 3 mic mix....
« Reply #16 on: June 24, 2003, 07:26:36 PM »
SO.....what's the new plan for IT??? ;D  2 guns and an omni or 2 cards and a gun or......if you're going to do the 3 mic thing I'll just try my split omnis!! ;)
"A Hippie is someone who walks like Tarzan, looks like Jane, and smells like Cheetah."  ~Ronald Reagan

Offline blu666z

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3277
  • AT ES943(H/C/O caps) » JKLab PP9 Pre » wmod UA-5
Re:UA5 3 mic mix....
« Reply #17 on: June 24, 2003, 07:55:53 PM »
I am going to tape the DMB show in Vancouver.  Going with a buddy who has a set of ommni's.  May have to give this a try!

-Kevin

jessedscott

  • Guest
  • Trade Count: (0)
Re:UA5 3 mic mix....
« Reply #18 on: June 25, 2003, 12:56:05 AM »
I'm uploading this show to Jonnys' server SLOWLY but it will get done, along with everything else!

Offline blu666z

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3277
  • AT ES943(H/C/O caps) » JKLab PP9 Pre » wmod UA-5
Re:UA5 3 mic mix....
« Reply #19 on: June 25, 2003, 01:06:28 AM »
How did you control the levels on the mics running into the back?  Did you use the input level control on the back?

-Kevin

jessedscott

  • Guest
  • Trade Count: (0)
Re:UA5 3 mic mix....
« Reply #20 on: June 25, 2003, 01:45:03 AM »
Kevin, YES. I checked the levels on the DAT. With the other mics OFF! Then turen the others on, and adjusted from there. I'll tinker with this set up some more! If everything is hooked up right in the back with th 3rd mic the levels should be even R/L channels... Good luck and as always HAPPY TAPING!!

JDS

 

RSS | Mobile
Page created in 0.067 seconds with 31 queries.
© 2002-2024 Taperssection.com
Powered by SMF