Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: 6V or 12V for Mini-Me  (Read 2112 times)

0 Members and 1 Guest are viewing this topic.

Offline capnhook

  • All your llamas are belong to us....
  • Site Supporter
  • Trade Count: (20)
  • Needs to get out more...
  • *
  • Posts: 4849
  • All your llamas are belong to us....
6V or 12V for Mini-Me
« on: September 05, 2008, 04:01:58 AM »
I'm running my mini-me on a 6V SLA right now.......if the Ah capacities were equal, should I run a 12V setup instead?  I'm thinking along the terms of the mini-me's brown-out voltage......shouldn't running 12V give me more run time?  ???

Thanks,
Kevin
Logged
Proud member of the reality-based community

BSCS-L->JB-mod [NAK CM-300 (CP-3) and/or (CP-1)]->LSD2->CA CAFS-Omni->Sony ECM-907**Apogee MiniMe Rev. C->CA Ugly II->**Edirol OCM R-44->Tascam DR-22WL->Sony TCD-D8


"Don't ever take an all or nothing attitude when it comes to making a difference
and being beautiful and making the world a beautiful place through your actions.
Every little bit is registered.  Every little bit.  So be as beautiful as you can as often as you can"

"It'll never be over, 'till we learn."
 
"My dream is to get a bus and get the band and just go coast to coast. Just about everything else except music, is anti-musical.  That's it.  Music's the thing." - Jeb Puryear

Offline jlykos

  • Trade Count: (6)
  • Needs to get out more...
  • *****
  • Posts: 4416
  • Gender: Male
  • Don't sweat the technique
Re: 6V or 12V for Mini-Me
« Reply #1 on: September 05, 2008, 06:29:52 AM »
I always ran a 6v Eco-Charge when running the MiniMe and I would get about 6.5 hours from it before dying.  To solve the problem of run time, I bought another 6v Eco-Charge.  Problem solved.
Logged
dpa 4061 > Church Audio 9200 > Sony PCM-D50 (Moon Audio Silver Dragon v3 interconnect)

"I have no views," Mickey Melchiondo, known as Dean Ween, said in a philosophical moment. "I am way too stupid. I have no strong feelings about anything. I'm really into television and the computer. I believe everything I see on TV and read on the Internet."

Offline Kindguy

  • Team Bama
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 6390
  • Gender: Male
Re: 6V or 12V for Mini-Me
« Reply #2 on: September 05, 2008, 03:51:13 PM »
Have you ever held a 12v?

Way to heavy IMO buy another 6v.
Logged
TDS!

DPA 4023> aeta PSP-2> Apogee Mini Me > R-44

http://www.basicallyfrightened.com/

stirinthesauce

  • Guest
  • Trade Count: (0)
Re: 6V or 12V for Mini-Me
« Reply #3 on: September 05, 2008, 03:51:58 PM »
i run 9v wallmart batts.  Lithium is much lighter that lead.
Logged
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.066 seconds with 28 queries.
© 2002-2024 Taperssection.com
Powered by SMF