Become a Site Supporter and Never see Ads again!

Author Topic: Mic clip for Franken Naks or JB mods.  (Read 303 times)

0 Members and 1 Guest are viewing this topic.

Offline ts

  • Trade Count: (56)
  • Needs to get out more...
  • *****
  • Posts: 2793
  • Gender: Male
Mic clip for Franken Naks or JB mods.
« on: November 13, 2017, 09:57:36 PM »
What are folks using? I used to have the older Audix D clips and they worked well but it appears they changed them. Unless someone figured out a small clip for the mini xlr binder you need a clip to grab the mic itself which is very short.

Offline boa

  • Trade Count: (5)
  • Taperssection Member
  • ***
  • Posts: 489
  • Gender: Male
  • crowesbase loves you
    • .o0O Crowesbase O0o.
Re: Mic clip for Franken Naks or JB mods.
« Reply #1 on: November 13, 2017, 10:17:48 PM »
What are folks using? I used to have the older Audix D clips and they worked well but it appears they changed them. Unless someone figured out a small clip for the mini xlr binder you need a clip to grab the mic itself which is very short.

Followinbob makes a 20mm clip that works great on the chopped Naks. He charged $48 + $7sh for a pair when he last quoted me. I've been using a pair of Shure doughnuts with no issues.
.o0O> JB Mod Nakamichi cm300/cp-3 > Naiant IPA > Edirol R44 / Sony M10 =||= Microtech Gefell sms2000/m21 & Aerco MP-2 courtesy of Mike Rathbun <O0o.

Offline ts

  • Trade Count: (56)
  • Needs to get out more...
  • *****
  • Posts: 2793
  • Gender: Male
Re: Mic clip for Franken Naks or JB mods.
« Reply #2 on: November 13, 2017, 10:23:42 PM »
Thanks. I’ll check it out.

Offline Moke

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 3212
  • m0k3 - √!n¥¬ 633|<
Re: Mic clip for Franken Naks or JB mods.
« Reply #3 on: November 13, 2017, 11:23:10 PM »
These are a pair of clips that I made from some cheap WindTech (name?) clips. Literally $5 clips.  I cut the more rounded-over feature, and then drilled them to fit an elastic band and cinch collar. I added some adhesive backed foam to support the mics. The elastic cord draws softly but snugly onto the mic and holds it solidly.  They treated the DPA 4028 compact series very well.
Cheap and simple.
Sent From My Craftsman Garage Door Opener

Offline ts

  • Trade Count: (56)
  • Needs to get out more...
  • *****
  • Posts: 2793
  • Gender: Male
Re: Mic clip for Franken Naks or JB mods.
« Reply #4 on: November 14, 2017, 02:43:59 PM »
These are a pair of clips that I made from some cheap WindTech (name?) clips. Literally $5 clips.  I cut the more rounded-over feature, and then drilled them to fit an elastic band and cinch collar. I added some adhesive backed foam to support the mics. The elastic cord draws softly but snugly onto the mic and holds it solidly.  They treated the DPA 4028 compact series very well.
Cheap and simple.

Thanks Mike! Looks cool. I do have some old mic clips that I definitely wouldn’t have a problem cutting up.

 

RSS | Mobile
Page created in 0.099 seconds with 27 queries.
© 2002-2017 Taperssection.com
Powered by SMF
Website Design by Foxtrot Media, Inc., a Baltimore Website Company