Become a Site Supporter and Never see Ads again!

Author Topic: xduoo x10 brick  (Read 356 times)

0 Members and 1 Guest are viewing this topic.

Offline intpseeker

  • Trade Count: (8)
  • Taperssection Member
  • ***
  • Posts: 758
  • Gender: Male
  • In music the passions enjoy themselves
xduoo x10 brick
« on: November 15, 2017, 11:43:47 AM »
Got a 'great deal on this player. Opened the box. listened to some tracks. Sounded quite good. Updated the firmware. Brick. No customer support. Bought a Fioo x5.

I have tried to update the firmware repeatedly, but nada.

Any thoughts about salvaging something from this little rig? Can I somehow wipe what is there and then attempt to reinstall?

Thanks :-\
Mics:        Akg 451 eb A51's, ck-1's, ck-2's, ck 8's
                Peluso CEMC6 MK2, MK4, MK21, MK41
                AKG 391
                CA-11 cards and omnis
Pre:          ST-9100
Cables:     XTC Silvers, DT47-12's
Recorders: ACM PMD660
                 Busman modded R-4
                 PCM-M10
                 DR-70D
                 Church modded R-09 micsketeer
“One good thing about music, when it hits- you feel no pain” - Bob Marley

Offline kindms

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 4299
    • The Breakfast
Re: xduoo x10 brick
« Reply #1 on: November 15, 2017, 12:40:57 PM »
What was the process for the firmware upgrade ? You could try doing the same with an older version and attempt to boot off of that if it will even power on.

If plugged in to a computer is it recognized at all ?

It also mentions a reset button on the device. Any action from that ?
« Last Edit: November 15, 2017, 12:42:42 PM by kindms »
AKG414 XLS/ST> TCM-Mod Tascam HDP2
Musichall Mambo > VR-2's

Offline intpseeker

  • Trade Count: (8)
  • Taperssection Member
  • ***
  • Posts: 758
  • Gender: Male
  • In music the passions enjoy themselves
Re: xduoo x10 brick
« Reply #2 on: November 15, 2017, 02:51:12 PM »
You add the compressed file to the mini sd and when the unit boots, it should update.

The reset works infrequently. On occasion, it works as intended, and I have played a song or two but
 then it freezes.
Mics:        Akg 451 eb A51's, ck-1's, ck-2's, ck 8's
                Peluso CEMC6 MK2, MK4, MK21, MK41
                AKG 391
                CA-11 cards and omnis
Pre:          ST-9100
Cables:     XTC Silvers, DT47-12's
Recorders: ACM PMD660
                 Busman modded R-4
                 PCM-M10
                 DR-70D
                 Church modded R-09 micsketeer
“One good thing about music, when it hits- you feel no pain” - Bob Marley

Offline kindms

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 4299
    • The Breakfast
Re: xduoo x10 brick
« Reply #3 on: November 15, 2017, 03:23:04 PM »
You add the compressed file to the mini sd and when the unit boots, it should update.

The reset works infrequently. On occasion, it works as intended, and I have played a song or two but
 then it freezes.

can you boot to the older firmware that you were using prior to upgrade ?

Sounds like bad firmware or possibly a hardware issue. I suspect firmware if it was fine prior to upgrading.
AKG414 XLS/ST> TCM-Mod Tascam HDP2
Musichall Mambo > VR-2's

Offline intpseeker

  • Trade Count: (8)
  • Taperssection Member
  • ***
  • Posts: 758
  • Gender: Male
  • In music the passions enjoy themselves
Re: xduoo x10 brick
« Reply #4 on: November 16, 2017, 12:00:46 PM »
You add the compressed file to the mini sd and when the unit boots, it should update.

The reset works infrequently. On occasion, it works as intended, and I have played a song or two but
 then it freezes.

This is my thought, but I can't find a copy of the v1.0 firmware.

I believe I have an expensive paperweight.

can you boot to the older firmware that you were using prior to upgrade ?

Sounds like bad firmware or possibly a hardware issue. I suspect firmware if it was fine prior to upgrading.
Mics:        Akg 451 eb A51's, ck-1's, ck-2's, ck 8's
                Peluso CEMC6 MK2, MK4, MK21, MK41
                AKG 391
                CA-11 cards and omnis
Pre:          ST-9100
Cables:     XTC Silvers, DT47-12's
Recorders: ACM PMD660
                 Busman modded R-4
                 PCM-M10
                 DR-70D
                 Church modded R-09 micsketeer
“One good thing about music, when it hits- you feel no pain” - Bob Marley

Offline jbell

  • TDS
  • Trade Count: (133)
  • Needs to get out more...
  • *****
  • Posts: 3888
  • Gender: Male
  • Spreadicated
Re: xduoo x10 brick
« Reply #5 on: November 18, 2017, 10:14:43 AM »
Try going back to the original firmware!  Here is the download page

http://www.xduoo.com/xduoo/En/DownList.Asp
Schoeps MK4's, MK41's> KCY 250/5 Ig> Naiant PFA(60V)> Sound Devices Mixpre-6

Offline kindms

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 4299
    • The Breakfast
Re: xduoo x10 brick
« Reply #6 on: November 18, 2017, 01:50:42 PM »
Try going back to the original firmware!  Here is the download page

http://www.xduoo.com/xduoo/En/DownList.Asp

thats the issue. they only list 1.1 and not the original firmware

i looked using the wayback machine as well but no luck
AKG414 XLS/ST> TCM-Mod Tascam HDP2
Musichall Mambo > VR-2's

Offline intpseeker

  • Trade Count: (8)
  • Taperssection Member
  • ***
  • Posts: 758
  • Gender: Male
  • In music the passions enjoy themselves
Re: xduoo x10 brick
« Reply #7 on: December 09, 2017, 12:57:04 PM »
Thanks all. Live and learn
Mics:        Akg 451 eb A51's, ck-1's, ck-2's, ck 8's
                Peluso CEMC6 MK2, MK4, MK21, MK41
                AKG 391
                CA-11 cards and omnis
Pre:          ST-9100
Cables:     XTC Silvers, DT47-12's
Recorders: ACM PMD660
                 Busman modded R-4
                 PCM-M10
                 DR-70D
                 Church modded R-09 micsketeer
“One good thing about music, when it hits- you feel no pain” - Bob Marley

 

RSS | Mobile
Page created in 0.165 seconds with 30 queries.
© 2002-2017 Taperssection.com
Powered by SMF
Website Design by Foxtrot Media, Inc., a Baltimore Website Company