I have a big problem with my Sony PCM-M10, that I'm hoping someone can help me out with. I've been using it without incident for quite some time and have never had a problem...until now. Saturday night, I used it to record a three set show. No problems. Everything was shut down and carefully packed as it always is. Sunday morning I removed the card to empty it, reinserted it and proceeded to turn the deck on to reset for the memory card, but when I turned it on, nothing. Power was clearly there, the access LED even blinks, but all I have is a black screen with what appears to be a thin frame around the edge in the normal orange color. Nothing works! If I press the record button, no record light and the pause doesn't blink. If I press the play button, it lights up...so I plugged in headphones and there was a recording on it that was playing back (from over a year ago when I first got it and didn't know I had to switch over the memory!). As I listened in amazement that something was working, I noticed the display screen go on, and then off again, and stayed off. The volume switch was not allowing me to adjust the the volume up or down. In fact, none of the other buttons or functions worked. Batteries, by the way, are good, but I tried plugging it in anyway (and of course removed the batteries in hopes of a simple reset). Well, it turned out that the internal memory was full, so I hooked the deck up to the computer and emptied it. After clearing the memory, I turned it off, then back on again. Once on, after a few seconds, the display blinked on for about a second, then went off again. The difference is, now the play button light won't go on if pressed (probably because there's nothing to play) but the record light will, and the pause button blinks as normal...but still no LED display. Here's a fun piece of info, the peak lights seem to be functioning fine, and after a minute or three, the display went on! Levels and all (from the internal mics)...but will not remain on. I've turned it off and back on again a few times. I was even able to see and set the memory card. The battery level shows full bars. The display will go on and off like it's got a mind of it's own, but mostly stays off. What the fuck? Has this happened to anyone else?