Topic: Clamp help!

[greenmtnsrider]

I'm trying to find an adapter that would allow me to mount my stereo bar on the Pedco Ultraclamp 4" clamp. I believe I need a 1/4 female to 5/8 male adapter, but I'm coming up empty trying to find one. If anyone could point me in the right direction it would me much appreciated. Thanks!

here's the clamp: http://www.amazon.com/PEDCO-P-UCA40-UltraClamp-Assembly-4-0-Inch/dp/B004VIXWHK/ref=pd_sim_sg_12

[flipp]

The only one-piece adapter I'm aware of is the AEA-TA1 (about 4/5 down the page). I vaguely recall someone posted another one here on ts but I don't recall who posted, who makes the adapter or where on ts the post is.

The above is rather expensive. You'll save some money by using a 1/4>3/8 then a 3/8>5/8 adapter. Both can be had from B&H photo cheaper than the above one-piece.

[F.O.Bean]

This is what you need. A bit pricey but worth every penny

http://www.ebay.com/itm/Adapter-1-4-20-Male-light-stand-to-standard-microphone-5-8-27-Male-Thread-5794-/321061117971?pt=US_Stands_Mounts_Holders&hash=item4ac0bbe013

[melvis1645]

This is 2 pieces but works great and is cheap. I have several.

http://www.bhphotovideo.com/c/product/535392-REG/General_Brand_Microphone_Reducer_Bushing.html

edited to add with shipping it might be more than the ebay one

[F.O.Bean]

Those are nice too Melvis

[tim in jersey]

Adding this to clamp-aholics thread...

[F.O.Bean]

Adding this to clamp-aholics thread...

DOOOOOOOOOOOO ETTTTTTTTTTTTTT!

[tim in jersey]

I'd love to see TS.com settle on a mic thread, as a standard. But that will never happen. Just want to make life in the clamping section easier...