Taperssection.com

Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: jcable77 on August 10, 2017, 08:11:42 PM

Title: Linking fp-24 to sd302 via a33lk link cable?
Post by: jcable77 on August 10, 2017, 08:11:42 PM
Is this possible? Ive been reading that the a33lk can link an f24 to an fp33 for an on the fly 5 channel mix and I know the 302 has the same t3af mix bus input but I can't find any more info on it? Also I found a small amount of info on phase cancellation when this is done and phase inverters are needed on the fp24 inputs. It makes sense but has anyone ever tried this set up with any success? Just about to pull the trigger on an fp and this sounds interesting as I already have a 302.
Title: Re: Linking fp-24 to sd302 via a33lk link cable?
Post by: Erick del Valle on August 16, 2017, 12:45:37 PM
Is this possible? Ive been reading that the a33lk can link an f24 to an fp33 for an on the fly 5 channel mix and I know the 302 has the same t3af mix bus input but I can't find any more info on it? Also I found a small amount of info on phase cancellation when this is done and phase inverters are needed on the fp24 inputs. It makes sense but has anyone ever tried this set up with any success? Just about to pull the trigger on an fp and this sounds interesting as I already have a 302.

Is it possible but not with a33lk cable. Sound devices mix input need shell grounded with pin 1 in ta3f.

Saludos
Erick del Valle
+56993193735
Santiago de Chile