Become a Site Supporter and Never see Ads again!

Author Topic: Anyone try this yet for Mix Pre 6?  (Read 1068 times)

0 Members and 1 Guest are viewing this topic.

Offline down2earthlandscaper

  • Multiple-Rig Maniac
  • Site Supporter
  • Trade Count: (29)
  • Taperssection Member
  • *
  • Posts: 734
  • Gender: Male
Mics: CA-14(cards & omnis) and CA-11(cards & omnis) ; AT853's(cards, hypers, mini shotguns); Busman BSC-1 (cards, hypers, omnis)
Nakamichi CM300's (CP-1,2,3,4) Nakamichi CM700's (cards, omnis)
Tascam PE-120's (cards, omnis) Peluso CEMC-6 (cards and subcards)
DPA 4061's DPA 4022's
Preamps: CA-9100; Naiant Tinybox (12v/48v + PIP 8V); Naiant Littlebox;
DPA MPS6030; Sound Device Mix Pre-D
Decks: Sony PCM M10; Edirol R-4; Zoom H6; Marantz PMD-661; Sound Devices 722

Offline fanofjam

  • Trade Count: (4)
  • Taperssection Member
  • ***
  • Posts: 298
Re: Anyone try this yet for Mix Pre 6?
« Reply #1 on: January 15, 2018, 05:57:37 PM »

Offline down2earthlandscaper

  • Multiple-Rig Maniac
  • Site Supporter
  • Trade Count: (29)
  • Taperssection Member
  • *
  • Posts: 734
  • Gender: Male
Re: Anyone try this yet for Mix Pre 6?
« Reply #2 on: January 15, 2018, 06:05:38 PM »
https://www.bhphotovideo.com/bnh/controller/home?A=details&O=&Q=&ap=y&c3api=1876%2C%7Bcreative%7D%2C%7Bkeyword%7D&gclid=Cj0KCQiAyszSBRDJARIsAHAqQ4pCpcqED1XKZVLjNwf16lLlja5L6bJuyS5N4RsrtmGIkzYhaDfIXlsaAq4IEALw_wcB&is=REG&m=Y&sku=1366733

Yes, it works great.  It's metal and snaps right into place with a distinctive snap.  Latches in solid and disconnects easy. 

I have one for sale in the Yard Sale, including mating cable

That’s good to know. I bought a couple of different USB-C cables -one seemed to work well, another was finicky and lost power a couple of times (during testing, luckily) and the supplied Y cable is incredibly stiff. And bulky. I worry about stressing the usb c input over time.
I think this Hirose adapter might be a great option, as I already own two Naztech pb15000 batteries and a Hirose cable.
Mics: CA-14(cards & omnis) and CA-11(cards & omnis) ; AT853's(cards, hypers, mini shotguns); Busman BSC-1 (cards, hypers, omnis)
Nakamichi CM300's (CP-1,2,3,4) Nakamichi CM700's (cards, omnis)
Tascam PE-120's (cards, omnis) Peluso CEMC-6 (cards and subcards)
DPA 4061's DPA 4022's
Preamps: CA-9100; Naiant Tinybox (12v/48v + PIP 8V); Naiant Littlebox;
DPA MPS6030; Sound Device Mix Pre-D
Decks: Sony PCM M10; Edirol R-4; Zoom H6; Marantz PMD-661; Sound Devices 722

Offline fanofjam

  • Trade Count: (4)
  • Taperssection Member
  • ***
  • Posts: 298
Re: Anyone try this yet for Mix Pre 6?
« Reply #3 on: January 16, 2018, 04:10:22 AM »
https://www.bhphotovideo.com/bnh/controller/home?A=details&O=&Q=&ap=y&c3api=1876%2C%7Bcreative%7D%2C%7Bkeyword%7D&gclid=Cj0KCQiAyszSBRDJARIsAHAqQ4pCpcqED1XKZVLjNwf16lLlja5L6bJuyS5N4RsrtmGIkzYhaDfIXlsaAq4IEALw_wcB&is=REG&m=Y&sku=1366733

Yes, it works great.  It's metal and snaps right into place with a distinctive snap.  Latches in solid and disconnects easy. 

I have one for sale in the Yard Sale, including mating cable

That’s good to know. I bought a couple of different USB-C cables -one seemed to work well, another was finicky and lost power a couple of times (during testing, luckily) and the supplied Y cable is incredibly stiff. And bulky. I worry about stressing the usb c input over time.
I think this Hirose adapter might be a great option, as I already own two Naztech pb15000 batteries and a Hirose cable.

If you decide to buy, let me know and I'll sell you this one without the cable.  It's virtually new.

 

RSS | Mobile
Page created in 0.077 seconds with 26 queries.
© 2002-2018 Taperssection.com
Powered by SMF