Become a Site Supporter and Never see Ads again!

Author Topic: can DPA d:vice be made to run other mics or take line in?  (Read 1292 times)

0 Members and 1 Guest are viewing this topic.

Online jerryfreak

  • Trade Count: (15)
  • Needs to get out more...
  • *****
  • Posts: 2192
  • I'm a llama! (taboot)
can DPA d:vice be made to run other mics or take line in?
« on: June 06, 2018, 03:09:01 PM »
is it possible to decouple the (presumably 5V) bias voltage from the 2-wire input power and either
a) disregard it
b) use it to power a 3-wire mic like schoeps cmr

i love the d:vice and the fact that it can run full size 4011s but i dont want to invest 3 grand in a 4011+MMP actives when i already have both CMR and n-bob actives and schoeps caps

can one of you crafty cable guys make an equivalent of the MMP actives (microdot to +48-60V) for schoeps caps? i believe that the schoeps caps are true condenser and the full sized dpas are electret condenser so that may be an issue. i could be totally wrong there tho

as far as simply decoupling, apparently it is a thing but im not sure how i would spec a decoupling cap to preserve audio quality
http://blog.shure.com/shure-tech-tip-phantom-power-vs-bias-voltage/
« Last Edit: June 08, 2018, 02:05:33 AM by jerryfreak »
in:
small: MK4/4V > CMR > V3 or J.Williams Mod MicMan Jr or no pre at all >AD2K/R07/PCM-A10/Oade Warm 661/DR100-MKIII

smaller: 4061/4099 CORE> d:vice MMAs

new kid on the block: 4011/4018 > MMP-G actives > d:vice

out:
home:Benchmark DAC1 HGC > Dynaudio BM15A active monitors
shop: Musical Fidelity VLink 192 Asynchronyous> coax> DAC1 > Rokit RP8 active monitors

 

RSS | Mobile
Page created in 0.07 seconds with 23 queries.
© 2002-2019 Taperssection.com
Powered by SMF