Become a Site Supporter and Never see Ads again!

Author Topic: Very SMALL XLR Interconnects  (Read 3894 times)

0 Members and 1 Guest are viewing this topic.

Offline AT853rxwh

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 829
  • You wanna stick those white mics where?
Very SMALL XLR Interconnects
« on: June 17, 2004, 06:05:15 PM »
Had a pic of the mini rig with the small interconnects, and got a few questions, so here is a better pic of em

« Last Edit: June 17, 2004, 06:15:50 PM by AT853rxwh »
"Oh, but you can't expect to wield supreme executive power just because some watery tart threw a sword at you!"

Offline AT853rxwh

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 829
  • You wanna stick those white mics where?
Re: Very Small XLR Interconnects
« Reply #1 on: June 17, 2004, 06:11:36 PM »
The connectors are switchcraft, the males are cut down and epoxy filled, the female ones have the rubber strain relief removed and also epoxy filled.  The cable is mic cable from Audio Technica.
« Last Edit: June 17, 2004, 06:16:12 PM by AT853rxwh »
"Oh, but you can't expect to wield supreme executive power just because some watery tart threw a sword at you!"

Offline Zaphod

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1738
  • Gender: Male
Re: Very SMALL XLR Interconnects
« Reply #2 on: July 09, 2004, 08:45:27 PM »
Those are sweet.

I need to make myself some here soon, but I'll be using Nuetrik(sp?) connectors. Did you just cut the males with a hack saw? And the epoxy can be had from Home Depot?

I'll have to cut down the threading of the Nuetriks and I don't wanna bend them with a clamp, got any ideas?
we are the people the rescuers will never find

Offline AT853rxwh

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 829
  • You wanna stick those white mics where?
Re: Very SMALL XLR Interconnects
« Reply #3 on: July 10, 2004, 12:20:03 AM »
Those are sweet.

I need to make myself some here soon, but I'll be using Nuetrik(sp?) connectors. Did you just cut the males with a hack saw? And the epoxy can be had from Home Depot?

I'll have to cut down the threading of the Nuetriks and I don't wanna bend them with a clamp, got any ideas?

I used a dremel with a cutting stone...  The epoxy is marine epoxy, they should have something like it at home depot....
"Oh, but you can't expect to wield supreme executive power just because some watery tart threw a sword at you!"

Offline Zaphod

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1738
  • Gender: Male
Re: Very SMALL XLR Interconnects
« Reply #4 on: July 10, 2004, 12:59:31 AM »
Thanks

Dremmel makes perfect sense, I'll have to write that down with things I still need, like a solder :) Good thing my friends have them for now!
we are the people the rescuers will never find

Offline nexus6

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 53
  • 'Policemen?'
Re: Very SMALL XLR Interconnects
« Reply #5 on: July 15, 2004, 05:00:58 PM »
You could even get them smaller with right angled XLRs cut down, eh?

ANDY

Offline AT853rxwh

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 829
  • You wanna stick those white mics where?
Re: Very SMALL XLR Interconnects
« Reply #6 on: July 15, 2004, 05:53:00 PM »
You could even get them smaller with right angled XLRs cut down, eh?

ANDY

maybe, but didnt need em shorter... plus the switchcrafts were free  ;D
"Oh, but you can't expect to wield supreme executive power just because some watery tart threw a sword at you!"

 

RSS | Mobile
Page created in 0.089 seconds with 31 queries.
© 2002-2024 Taperssection.com
Powered by SMF