Topic: LC3KA lemo connector mod?

[JasonR]

BTW - Is the ALC 0 the same pinout as the LemoSAX?

Yes.  If I understand the old Schoeps numbering scheme, the ALC0 is a small connector for the body one one end, and with the LEMO connector on the other side.  This is the exact same connection as found on the side of the SX-M2/LS and /LS2 boxes, as well as an old Schoeps "Collette Mixer" "MCQ" I believe.

Below are photos of a modern day take on the ALC0 (a chopped up KC5 cable with LEMO connector).

Next shot shows the ALC0 with a CMC5 body.

Next with the ALC0, CMC5, KCL, and an MK2 cap.  "KCL" was the old nomenclature for the active cable including the cap connector, length of cable, and the lemo connector to interface with the ALC0.  Again, a modern take following the old standard.

And finally the same cap and cable connecting to the Sonosax.

All the same connector - same old Schoeps standard.

- Jason