Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: Schoeps VMS02ib pre-am, info needed  (Read 1961 times)

0 Members and 1 Guest are viewing this topic.

Offline gmm6797

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 3591
  • Gender: Male
  • Schoeps MK4 > nBoxPlat > Sony A10/SDMixPre6/SD 722
    • Homepage
Schoeps VMS02ib pre-am, info needed
« on: May 29, 2006, 10:25:35 PM »
Has anyone every tried to split the BNC signal at the back of the VMS with a BNC "T" splitter (or some other splitter)?

If so, what were the results?

I want to do a field test of
Pre-Amp > A>D > Deck
  vs
Pre-Amp > Deck
but I want both to be the same source... if you follow.

Any thoughts or ideas are appreciated.

TIA
Logged

Offline balou2

  • Crippled, but still dancin'
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 4442
  • Gender: Male
  • He was a friend of mine.
    • Little Mountain Sound Archive
Re: Schoeps VMS02ib pre-am, info needed
« Reply #1 on: May 30, 2006, 12:58:13 AM »
I've not done it on the Schoeps, but I did it on the AD2K and there were no issues at all.
Logged
Socks are overrated.

Offline gngrbrdman13

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1620
  • Gender: Male
Re: Schoeps VMS02ib pre-am, info needed
« Reply #2 on: June 05, 2006, 08:00:53 PM »
split away.  I know that schoepsnbox did it with the nbox which the VMS02ib was modeled after and it worked fine.  I have done it with all my other pres for comps and never had an issue.

I say go for it....Interesting comp BTW
Logged

Offline gmm6797

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 3591
  • Gender: Male
  • Schoeps MK4 > nBoxPlat > Sony A10/SDMixPre6/SD 722
    • Homepage
Re: Schoeps VMS02ib pre-am, info needed
« Reply #3 on: June 06, 2006, 09:46:27 PM »
Quote from: ddnevi13 on June 05, 2006, 08:00:53 PM
split away.  I know that schoepsnbox did it with the nbox which the VMS02ib was modeled after and it worked fine.  I have done it with all my other pres for comps and never had an issue.

I say go for it....Interesting comp BTW

Thanks, I am going to do some testing this week with the UA5 that busman2 sent me on Monday :)
Logged
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.049 seconds with 32 queries.
© 2002-2024 Taperssection.com
Powered by SMF