Topic: Nakamichi cm 300 ring/washer

[Mikel]

I tried to search for this topic but no luck.
What's a good replacement for the black plastic ring/washer between the capsule and body on a Nak 300?
Thanx
Mike

[SmokinJoe]

I don't have a good answer to your question, but I just ran without them... screw it down until it stops, don't crank the hell out of the threads, and there will be a little gap.

[Mikel]

That's what I've been doin' so far. Was hoping to hear about a quick fix.
Thanx much

[followinbob]

need something mechanical made ican help. have a cnc machine shop.  finally ready to make active cable ends for a bunch of different mics.

[runonce]

Poke around in the faucet part drawer at Lowes or your hardware store.

There are O-rings and other nylon rings that can do the job.

[Mikel]

Cool...I'll give it a try.

[Roger Gustavsson]

There are O-rings and other nylon rings that can do the job.

Yes, o-rings about 20x1 mm, could do the trick.

[Chuck]

need something mechanical made ican help. have a cnc machine shop.  finally ready to make active cable ends for a bunch of different mics.

!

[Hypnocracy]

I tried to search for this topic but no luck.
What's a good replacement for the black plastic ring/washer between the capsule and body on a Nak 300?
Thanx
Mike

Put a ISO on the Nak Team Thread....there are folks whom modify these and may have one laying around.

need something mechanical made ican help. have a cnc machine shop.  finally ready to make active cable ends for a bunch of different mics.

!

If we could only get the guts to put into it...right Chuck