Become a Site Supporter and Never see Ads again!

Author Topic: pre-amp and mic compatibility?  (Read 1881 times)

0 Members and 1 Guest are viewing this topic.

Offline panic_fan_dan

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 17
  • Gender: Male
pre-amp and mic compatibility?
« on: July 28, 2005, 11:25:02 AM »
I am wanting to buy a mic pre-amp, but I am running into the problem that the mics that I use run off of a battery source which will not let me run 48v phantom power because it could over power the mic (from company rep). I need to find a pre-amp that has switchable phantom power option. I have wanted to buy a used oade mod ua-5, but I believe that it does not have switchable phantom power. Iwould like to get a a/d coverter/ pre-amp in one unit. Cost considerations $500 or under. Need advice on what I should get? Any help would be much appreciated.
« Last Edit: July 28, 2005, 11:33:26 AM by panic_fan_dan »
JB 7/25/97 Starwood Amphitheater, Nashville, TN "Here's a song we used to play at weddings in our younger days"===>Bowlegged Woman

Offline neumannkid

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1553
  • Gender: Male
    • Shows Ive taped on the archive
Re: pre-amp and mic compatibility?
« Reply #1 on: July 28, 2005, 12:36:55 PM »
You can use the UA-5 without using the phantom power, I do it all the time with mine cause Im just using it for a/d conversion. It has button to activate the phantom power.

Offline NJFunk

  • Trade Count: (1)
  • Taperssection All-Star
  • ****
  • Posts: 1475
Re: pre-amp and mic compatibility?
« Reply #2 on: July 28, 2005, 05:10:41 PM »
Danecke AD 20 is another option for a pre/ADC all-in-one.  This has no phantom power at all.

Offline dklein

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1184
  • Gender: Male
Re: pre-amp and mic compatibility?
« Reply #3 on: July 30, 2005, 07:50:32 PM »
You'll find almost every pre has a phantom on/off switch.
KM 184 > V2 > R4
older recording gear: UA-5  / emagic A62 / laptop / JB3 / CSB / AD20 / Sharp MT-90 / Sony MDS-JE510
Playback: Pioneer DV-578 > Lucid DA 9624 >many funny little british boxes > Linn Isobarik PMS

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: pre-amp and mic compatibility?
« Reply #4 on: July 30, 2005, 10:22:17 PM »
what mics?

id ditch the mics and get mics WITH phantom so they can suck up all of that yumnmy energy
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

 

RSS | Mobile
Page created in 0.217 seconds with 33 queries.
© 2002-2024 Taperssection.com
Powered by SMF