Become a Site Supporter and Never see Ads again!

Author Topic: Sony PCM 10 - Plug in power  (Read 2935 times)

0 Members and 1 Guest are viewing this topic.

Offline tomy01

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 60
Sony PCM 10 - Plug in power
« on: September 09, 2018, 07:17:37 PM »
I just picked up a used SONY PCM-M10, Ugly Battery Box and some CA-11's and I usually plug the CA-11's in the microphone jack.  The question I have -  since I am using an Ugly Battery Box does it matter if I set the "Plug In Power" to ON or OFF?

Thanks

Offline vanark

  • TDS
  • Site Supporter
  • Trade Count: (29)
  • Needs to get out more...
  • *
  • Posts: 8510
  • If you ain't right, you better get right!
    • The Mudboy Grotto - North Mississippi Allstar fan site
Sony PCM 10 - Plug in power
« Reply #1 on: September 10, 2018, 06:42:28 AM »
Turn plug in power off if you are using a battery box.
If you have a problem relating to the Live Music Archive (http://www.archive.org/details/etree) please send an e-mail to us admins at LMA(AT)archive(DOT)org or post in the LMA thread here and we'll get on it.

Link to LMA Recordings

Link to Team Dirty South Recordings on the LMA

Mics: Microtech Gefell M21 (with Nbob actives) | Church Audio CA-11 (cards) (with CA UBB)
Pres: babynbox
Recorders: Tascam DR-60D | Tascam DR-40 | Sony PCM-A10 | Edirol R-4

 

RSS | Mobile
Page created in 0.057 seconds with 31 queries.
© 2002-2024 Taperssection.com
Powered by SMF