Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: Screw on 3.5's? (Paging Chris Church)  (Read 2750 times)

0 Members and 1 Guest are viewing this topic.

Offline travelinbeat

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 2313
  • Gender: Male
  • Turning soundwaves into zeros and ones since 1999
    • http://db.etree.org/travelinbeat
Screw on 3.5's? (Paging Chris Church)
« on: May 04, 2010, 12:03:30 AM »
I know Sony has screw together pieces for some of their can-style headphones, I'm wondering if you folks know of any place that sells just the plug (so that I could solder some things on my own). I'm also wondering about modifying my ST-9100 and CA-14's to have the screw-on plugs (or, Chris, maybe I could just send them to you if we can reach a good price for the labor).  I just recorded Weezer a few nights ago and I have finally had it with accidental unplugs!!!  I'd love to mod all of my cable to screw together for good, anxiety-free connection.

Thanks in advance

EDIT:  Obviously I am looking for both male and female, if possible
Logged
Mics: Busman BSC1's K1/K2/K3/K4, CA-14's
Units: 2x Edirol R-09HR, iRiver H120 (RockBox + 2200mAh + CF mod)
Power & Accessories: Naiant Littlebox 1.5, Church ST-9100, Denecke PS-2, 2x Kingston SDHC (Model: SD2/8GB), 2x Kingston SDHC (Model: SD4/16GB), Kingston 32GB (Model: SD4/32GB), Darktrain XLR, 2x Shure A81WS's, 4x Powerex 9.6v, 12x Sanyo 2700 NiMH, 2x AT8410A's

Team DC · Team Naiant · Team Busman · Team Church Audio · NFL Team is NY Jets

I tape in earnest dedication to the mission of breaking the back of the CTOA

Offline Neilyboy

  • Trade Count: (14)
  • Taperssection Member
  • ***
  • Posts: 917
  • Gender: Male
Re: Screw on 3.5's? (Paging Chris Church)
« Reply #1 on: May 04, 2010, 08:08:39 AM »
Logged
Mic's: AKG C214's, Line Audio CM3, AT4041SP, AT853 (C, SC, O), AT943 (C, H)
Pre's: Sound Devices MixPre 2
Rec's: Sony PCM-M10, Edirol R-44, Tascam DR60D MKii, Tascam DR70D x 2

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 15714
  • Gender: Male
  • "Better to love music than respect it" ~Stravinsky
Re: Screw on 3.5's? (Paging Chris Church)
« Reply #2 on: May 04, 2010, 11:19:51 AM »
Suggestion- gaffer taping your connections is cheap, removable and works well to prevent an accidental signal break.
Logged
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

Offline crazifyngers

  • Trade Count: (13)
  • Taperssection Member
  • ***
  • Posts: 340
  • Gender: Male
Re: Screw on 3.5's? (Paging Chris Church)
« Reply #3 on: May 04, 2010, 12:19:37 PM »
Logged
Quote from: Kush on April 01, 2010, 03:40:36 PM
Gotta love the rat-tail Jerry has; it's where his power comes from!
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.065 seconds with 28 queries.
© 2002-2024 Taperssection.com
Powered by SMF