Become a Site Supporter and Never see Ads again!

Author Topic: Suitable wall plug > USB for powering a SD USBPRE2?  (Read 2855 times)

0 Members and 1 Guest are viewing this topic.

Offline ellaguru

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 3359
  • Gender: Male
    • the wendy hour
Suitable wall plug > USB for powering a SD USBPRE2?
« on: May 25, 2016, 03:25:02 PM »
i see alot of plugs & cables out there that will obviously hook it all together, but before i blow it up with a cell phone charging cable, is there one out there that powers it properly? 

thanks
chris

Offline morst

  • I think I found an error on the internet; #UnionStrong
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 5944
Re: Suitable wall plug > USB for powering a SD USBPRE2?
« Reply #1 on: June 27, 2016, 02:06:36 PM »
According to the specs, you'll want a USB wall wart with 500mA of capacity. If you can find one that's 600mAh then it won't be pushing all-out and might last longer.

Quote
Powering

    USB bus powered, soft-start meets USB hot-plugging power requirements (5 V, 100 mA max current drawn during enumeration)
    5 V, 500 mA max current from USB port (USBPre 2 will not function if connected through a passive USB connection or hub)

edit: https://www.sparkfun.com/products/11456
I can't vouch for the seller or brand, just a quickie web search, but this one puts out a full 1A, that's 1000mA to you & me!
« Last Edit: June 27, 2016, 02:08:51 PM by morst »
https://toad.social/@morst spoutible.com/morst post.news/@acffhmorst

Offline ellaguru

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 3359
  • Gender: Male
    • the wendy hour
Re: Suitable wall plug > USB for powering a SD USBPRE2?
« Reply #2 on: July 03, 2016, 09:11:48 AM »
thanks for the guidance. 

 

RSS | Mobile
Page created in 0.044 seconds with 27 queries.
© 2002-2024 Taperssection.com
Powered by SMF