Become a Site Supporter and Never see Ads again!

Author Topic: AT actives?  (Read 1938 times)

0 Members and 1 Guest are viewing this topic.

Offline heathen

  • Trade Count: (23)
  • Needs to get out more...
  • *****
  • Posts: 3528
AT actives?
« on: October 27, 2017, 03:46:30 PM »
This is more out of curiosity than anything else, but can the AT caps (not the mini 853/943 size caps but larger like the 4051) be run in an active setup like people do with Schoeps, AKGs, etc?
Mics: AT4050ST | AT4031 | AT853 (C/SC) | Line Audio CM3 | Sennheiser e614 | Sennheiser MKE2 | DPA 4061 Pre: CA9200 Decks: Zoom F8 | Roland R-05

Offline T-90

  • Trade Count: (7)
  • Needs to get out more...
  • *****
  • Posts: 2429
  • Gender: Male
  • ya aint gotta do what ya aint gotta do
Re: AT actives?
« Reply #1 on: October 28, 2017, 09:03:23 AM »
I would also like to know the answer to this, in particular for the 405x series.
"I dont sing...I dont dance...and I dont like to be around anyone who does" D.Letterman
DPA 4023, AT4051a, AT4053a
Countryman B3, AT853(4.7k,c,sc,h)
V3, FP24, Bm2p+ UA5, ST9100
OCM Edirol R-44, Sony PCM-M10

Offline larrysellers

  • Trade Count: (35)
  • Needs to get out more...
  • *****
  • Posts: 2152
  • Gender: Male
  • Qualified
Re: AT actives?
« Reply #2 on: October 28, 2017, 10:10:10 AM »
The short answer is yes. See here ---> http://taperssection.com/index.php?topic=168809.msg2238231#msg2238231  . My advise would to contact Jon directly and offer a body + capsule on loan so everything can be measured.

Offline T-90

  • Trade Count: (7)
  • Needs to get out more...
  • *****
  • Posts: 2429
  • Gender: Male
  • ya aint gotta do what ya aint gotta do
Re: AT actives?
« Reply #3 on: October 28, 2017, 12:08:12 PM »
^ thanks man!
"I dont sing...I dont dance...and I dont like to be around anyone who does" D.Letterman
DPA 4023, AT4051a, AT4053a
Countryman B3, AT853(4.7k,c,sc,h)
V3, FP24, Bm2p+ UA5, ST9100
OCM Edirol R-44, Sony PCM-M10

 

RSS | Mobile
Page created in 0.06 seconds with 29 queries.
© 2002-2024 Taperssection.com
Powered by SMF