Become a Site Supporter and Never see Ads again!

Author Topic: SP-BMC-1 Omni´s - Batterybox question  (Read 259 times)

0 Members and 1 Guest are viewing this topic.

Offline u2_fly_2

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 145
SP-BMC-1 Omni´s - Batterybox question
« on: October 28, 2017, 09:56:21 AM »
Hello fellow tapers,

These days I usually tape with this rig:

AT943 >> Micro-mini microphone power supply with mini 12vdc battery >> Olympus LS- 10

I also have some old SP-BMC-1 Omni´s that I taped with many years back. I run them directly into the Olympus LS-10.

My question is:

If I sometimes would like to run both rigs (I have one more Olympus LS-10) would I benefit from having a 12vdc battery box for the SP-BMC-1 mic´s as well?

Or should I tape with the SP-BMC-1 directly into the Olympus LS-10 like I used to?

My "double-rig" would then be:

AT 943 >> 12vdc battery box >> Olympus LS-10

SP-BMC-1 >> 12vdc battery box >> Olympus LS-10

Thank you!






« Last Edit: October 28, 2017, 09:58:24 AM by u2_fly_2 »
Soundprofessionals Audio Technica AT 943 (SP-CMC-8) External Stereo Microphones > SP-SPSB-10-80020
Sound Professionals Micro-mini microphone power supply with mini 12vdc battery and 24 inch hardwired output cable Soundprofessionals Batterybox >> Olympus Ls-10 Linear Recorder > 4 GB > 24 Bit / 48 Khz  > 24 Bit / 96 Khz

Roland R-26 (96 / 24 Bit)

Sony PCM-D100 (192 / 24 Bit)

 

RSS | Mobile
Page created in 0.067 seconds with 23 queries.
© 2002-2017 Taperssection.com
Powered by SMF
Website Design by Foxtrot Media, Inc., a Baltimore Website Company