Become a Site Supporter and Never see Ads again!

Author Topic: How do you transport caps and mic bodies?  (Read 7835 times)

0 Members and 1 Guest are viewing this topic.

Offline ycoop

  • Trade Count: (9)
  • Taperssection Member
  • ***
  • Posts: 647
  • Gender: Male
How do you transport caps and mic bodies?
« on: June 13, 2018, 05:43:05 PM »
This question is directed at those using full bodied SDCs, not actives or AT853/CA14 sized mics.

I used the box that came with my Avantone CK-1s and it worked nicely, especially as the width of the two placed side by side longwise fit perfectly into my backpack and it allowed me to easily pack the additional caps and shockmoints. I do anticipate moving to a dedicated gear bag and the boxes aren’t light. What’s your approach?
Mics: Avantone CK-1s, AT853 c+o
Pres: CA9100
Recorders: DR-60d mkII, DR-2d

Online aaronji

  • Site Supporter
  • Trade Count: (9)
  • Needs to get out more...
  • *
  • Posts: 3861
Re: How do you transport caps and mic bodies?
« Reply #1 on: June 13, 2018, 05:49:26 PM »
A lot of people use cigar caddies. Personally, I use a Pelican box with pick-n-pluck foam. My mics have quite small bodies, though, so I can use a rather small Pelican.

Offline pohaku

  • Site Supporter
  • Trade Count: (35)
  • Taperssection All-Star
  • *
  • Posts: 1091
  • Gender: Male
Re: How do you transport caps and mic bodies?
« Reply #2 on: June 13, 2018, 06:56:22 PM »
Small Pelican cases.  They work great.
Mics: akg c460 (ck61, ck63), c414buls, c568eb; at4049a, 4051a, 4053a, at853; josephson c42; neumann U87, km84i; beyer m130, m160, m500; aea r84; gefell m71, mt711s, m200, m201, um70S; sony c38; schoeps cmc6, CMBI (mk4, mk21, mk41, mk4v); sennheiser mkh30, mkh40, md421, md431, md541; audix m1290
Pres: API, a-designs, pendulum, purple, millennia TD-1 and HV-32P, gt, littlebox, tinybox, usbpre2, CA 9200, pipsqueak, grace V2, DAV BG1
Cables: KCY, CMR, Naiant AKG actives, PFAs, asst.  GAKables and Darktrain
Recorders/converters/monitors: dr680, m10, dr-2d, d50, zoom f8 & F8n pro, 788T SSD CL-8, lynx aurora 8, Neumann KH20


Yeah, I'm an attorney, but everyone needs a day job

Offline vanark

  • TDS
  • Site Supporter
  • Trade Count: (29)
  • Needs to get out more...
  • *
  • Posts: 8510
  • If you ain't right, you better get right!
    • The Mudboy Grotto - North Mississippi Allstar fan site
Re: How do you transport caps and mic bodies?
« Reply #3 on: June 13, 2018, 10:14:24 PM »
Cigar caddy for the bodies, small Pelican case with pick n pluck foam for the caps.
If you have a problem relating to the Live Music Archive (http://www.archive.org/details/etree) please send an e-mail to us admins at LMA(AT)archive(DOT)org or post in the LMA thread here and we'll get on it.

Link to LMA Recordings

Link to Team Dirty South Recordings on the LMA

Mics: Microtech Gefell M21 (with Nbob actives) | Church Audio CA-11 (cards) (with CA UBB)
Pres: babynbox
Recorders: Tascam DR-60D | Tascam DR-40 | Sony PCM-A10 | Edirol R-4

Offline opsopcopolis

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 2144
Re: How do you transport caps and mic bodies?
« Reply #4 on: June 13, 2018, 11:20:26 PM »
Cigar Caddy since day one. Love it

Offline obaaron

  • Trade Count: (48)
  • Taperssection All-Star
  • ****
  • Posts: 1246
  • Gender: Male
  • Wide Awake in San Diego!
Re: How do you transport caps and mic bodies?
« Reply #5 on: June 13, 2018, 11:28:13 PM »
Cigar caddies.....ive got one that holds one set of mics, and another that holds 2 sets. Works great
« Last Edit: June 13, 2018, 11:29:45 PM by obaaron »
Mics:  Gefell M20,M21- sms2000/nbob | Schoeps MK4V;MK4- cmc1L/cmc6/nbob | AKG ck1,3,8,22;ck61,62,63,69- c460b/c480b/Naiant/nbob actives | Neumann KM140/150 | AT853, AT933 | CA-11 | DPA 4022 (on loan)
Pres: Naiant Littlebox | Tinybox | BMod Edirol UA-5 | Church ST-9200
Recorders:  Zoom F8 | Tascam DR-680 | Tascam DR-60D | Sony PCM-M10
Video: Canon VIXIA HF R42

**ISO** -   Schoeps mk22 matched pair | Neumann Ak43 pair

Offline rocksuitcase

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 8284
  • Gender: Male
    • RockSuitcase: stage photography
Re: How do you transport caps and mic bodies?
« Reply #6 on: June 13, 2018, 11:41:55 PM »
Have a cigar caddy, it doesn't do it for me.
We used to use a pistol case, but recently went with this poor man's Pelican (lol) an Auray (less than $20 at BnH)
here's a before and after the pick n pluck also showing the pistol case
music IS love

When you get confused, listen to the music play!

Mics:         AKG460|CK61|CK1|CK3|CK8|Beyer M 201E|DPA 4060 SK
Recorders:Marantz PMD661 OADE Concert mod; Tascam DR680 MKI x2; Sony PCM-M10

Offline ycoop

  • Trade Count: (9)
  • Taperssection Member
  • ***
  • Posts: 647
  • Gender: Male
Re: How do you transport caps and mic bodies?
« Reply #7 on: June 14, 2018, 02:52:26 AM »
Have a cigar caddy, it doesn't do it for me.
We used to use a pistol case, but recently went with this poor man's Pelican (lol) an Auray (less than $20 at BnH)
here's a before and after the pick n pluck also showing the pistol case

Is the Auray soft shell? Seems a bit precarious for capsules.

Can you say what about the cigar caddies doesn’t work well for you?
« Last Edit: June 14, 2018, 02:58:24 AM by ycoop »
Mics: Avantone CK-1s, AT853 c+o
Pres: CA9100
Recorders: DR-60d mkII, DR-2d

Offline morst

  • I think I found an error on the internet; #UnionStrong
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 5950
Re: How do you transport caps and mic bodies?
« Reply #8 on: June 14, 2018, 04:09:34 AM »
I could not find a cigar caddy I liked for my KM184-sized mics, so I went to a container store and got cheap clear plastic boxes with hinged lids and cheap snap latches, and added some brown paper padding from a recent parcel. Approx $3 each, they measure 3.25" x 4.5" x 1"

I travel with them inside a PortaBrace, so they won't come open, but these are certainly not rugged in any sense. I just need to protect the mics from each other so they don't get any (more) dings!
https://toad.social/@morst spoutible.com/morst post.news/@acffhmorst

Offline rocksuitcase

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 8284
  • Gender: Male
    • RockSuitcase: stage photography
Re: How do you transport caps and mic bodies?
« Reply #9 on: June 14, 2018, 06:47:36 AM »
Have a cigar caddy, it doesn't do it for me.
We used to use a pistol case, but recently went with this poor man's Pelican (lol) an Auray (less than $20 at BnH)
here's a before and after the pick n pluck also showing the pistol case

Is the Auray soft shell? Seems a bit precarious for capsules.

Can you say what about the cigar caddies doesn’t work well for you?
It's pretty sturdy when closed. sort of like those headphone cases for Bose headphones-soft but protective- the outside is a cordura like material.
I didn't like how tight the cigar caddy was around the caps. Plus, I didn't like the fit for our bodies with the knuckles attached. translation- our mics were too large for the cigar caddy I own.
« Last Edit: June 14, 2018, 10:21:52 AM by rocksuitcase »
music IS love

When you get confused, listen to the music play!

Mics:         AKG460|CK61|CK1|CK3|CK8|Beyer M 201E|DPA 4060 SK
Recorders:Marantz PMD661 OADE Concert mod; Tascam DR680 MKI x2; Sony PCM-M10

Offline goodcooker

  • Trade Count: (43)
  • Needs to get out more...
  • *****
  • Posts: 4639
  • Gender: Male
  • goes to 11
Re: How do you transport caps and mic bodies?
« Reply #10 on: June 14, 2018, 07:52:54 AM »

I've used a memory foam lined fly tackle box for a dozen years. Had to super glue in some rubber window gasket to keep the mics separated but it works perfectly.

Whatever you end up using the most important thing is that you cover it in stickers and backstage passes...

Also used a Pelican case (I think the 1600) for my AKG 460s and multiple capsules. This would be a good solution for your Avantones that are roughly the same size. You can get off brand ones cheaper at the big chain outdoors stores.
Line Audio CM3/OM1 || MBHO KA500 hyper>PFA|| ADK A51 type IV || AKG C522XY
Oade Warm Mod and Presence+ Mod UA5s || Aerco MP2(needs help) || Neve Portico 5012 || Apogee MMP
SD Mixpre6 || Oade Concert Mod DR100mkii

pocket sized - CA11 cards > SP SB10 > Sony PCM A10

http://www.archive.org/bookmarks/goodcooker

"Are you the Zman?" - fan at Panic 10-08-10 Kansas City
"I don't know who left this perfectly good inflatable wook doll here, but if I'm blowing her up, I'm keeping her." -  hoppedup

Offline rigpimp

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 3177
  • Gender: Male
  • Jarts don't kill people!
Re: How do you transport caps and mic bodies?
« Reply #11 on: June 14, 2018, 12:14:35 PM »
I use a Tupperware sandwich container with all of my vials tightly wrapped in a micro-fleece cloth
Mics: Schoeps MK 5 MP, Schoeps MK 8 MP, Schoeps MK 41 MP, KCY 250/5 > PFA
Pre/A>D/P48: Sonosax SX/M2, Sonosax SX/M2-LS, E.A.A. PSP-2, Baby Nbox, Neumann BS48i-2 (for sale)
Recorders: Sound Devices Mixpre-6ii, Sony PCM-A10
Playback: Jolida 1501 Hybrid > McIntosh MX 130 > Von Schweikert VR-4 JR, or Little Dot MK III > Sennheiser HD700
http://archive.org/bookmarks/kskreider
https://www.concertarchives.org/kskreider
https://archive.org/details/thespps

Offline nak700s

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 634
  • Gender: Male
Re: How do you transport caps and mic bodies?
« Reply #12 on: June 14, 2018, 02:50:01 PM »
I use a travel cigar case for my mics, which I love.  What I'd like, is a hard-shell case that I can line with a thin layer of dense foam to put my SD 744T in, and take up less bag space than wrapping it in a towel, as well one for my SD 302.  Sturdy plastic cases would be wonderful... Does anyone use such a thing that they can recommend?
Normal: Nakamichi CM-700's >> SD 744T (or) Sony PCM-M10
Normal: Crown CM-700's >> SD 302 >> SD 744T
Fun times: 3 Crown CM-700's >> SD 302 >> SD744T + 2 Nakamichi CM-700's >> SD744T
Stealth: CA-14c >> CA 9200 >> Edirol R-09HR
Ultra stealth: AudioReality >> AudioReality battery box >> Edirol R-09HR
Simple & Sweet!

Offline ycoop

  • Trade Count: (9)
  • Taperssection Member
  • ***
  • Posts: 647
  • Gender: Male
Re: How do you transport caps and mic bodies?
« Reply #13 on: June 14, 2018, 04:45:39 PM »
Thanks for all the input. I’m going to check out the local military surplus store to see if they have anything useful. I’m thinking a cigar caddy for the mic bodies and then a hard shell case from the surplus store+replacement foam for the caps.
Mics: Avantone CK-1s, AT853 c+o
Pres: CA9100
Recorders: DR-60d mkII, DR-2d

Online aaronji

  • Site Supporter
  • Trade Count: (9)
  • Needs to get out more...
  • *
  • Posts: 3861
Re: How do you transport caps and mic bodies?
« Reply #14 on: June 14, 2018, 04:53:59 PM »
I use a travel cigar case for my mics, which I love.  What I'd like, is a hard-shell case that I can line with a thin layer of dense foam to put my SD 744T in, and take up less bag space than wrapping it in a towel, as well one for my SD 302.  Sturdy plastic cases would be wonderful... Does anyone use such a thing that they can recommend?

Some of the dedicated audio bags have built-in shell-like systems, foam, and rigid frames.  They are not cheap, though.  I am blocking on brands at the moment.  Maybe Orca?

Offline nak700s

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 634
  • Gender: Male
Re: How do you transport caps and mic bodies?
« Reply #15 on: June 14, 2018, 04:55:07 PM »
Thanks for all the input. I’m going to check out the local military surplus store to see if they have anything useful. I’m thinking a cigar caddy for the mic bodies and then a hard shell case from the surplus store+replacement foam for the caps.

The travel cigar cases come in many sizes, so you can get one that would accommodate the bodies and caps.  Mine can hold my 4 mics, as well as spare caps if I want.  You can also carve out the foam if needed.  Just to get an idea of the many offered, go on ebay and look, just enter 4 cigar travel humidor (as an example).
Normal: Nakamichi CM-700's >> SD 744T (or) Sony PCM-M10
Normal: Crown CM-700's >> SD 302 >> SD 744T
Fun times: 3 Crown CM-700's >> SD 302 >> SD744T + 2 Nakamichi CM-700's >> SD744T
Stealth: CA-14c >> CA 9200 >> Edirol R-09HR
Ultra stealth: AudioReality >> AudioReality battery box >> Edirol R-09HR
Simple & Sweet!

Offline nak700s

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 634
  • Gender: Male
Re: How do you transport caps and mic bodies?
« Reply #16 on: June 14, 2018, 05:01:41 PM »
I use a travel cigar case for my mics, which I love.  What I'd like, is a hard-shell case that I can line with a thin layer of dense foam to put my SD 744T in, and take up less bag space than wrapping it in a towel, as well one for my SD 302.  Sturdy plastic cases would be wonderful... Does anyone use such a thing that they can recommend?

Some of the dedicated audio bags have built-in shell-like systems, foam, and rigid frames.  They are not cheap, though.  I am blocking on brands at the moment.  Maybe Orca?

I have a Petrol Bag, which is amazing, but there are times when it is more of a hassle than a benefit, and I have to use a back pack.  For those times, I'm looking for more protective cases for the 744T and the 302.   Yes, Orca and Porto brace are other great bags as well.  This weekend, for Dead & Co., I need to use a backpack because it's much easier to lug around between the train and the stadium...
Normal: Nakamichi CM-700's >> SD 744T (or) Sony PCM-M10
Normal: Crown CM-700's >> SD 302 >> SD 744T
Fun times: 3 Crown CM-700's >> SD 302 >> SD744T + 2 Nakamichi CM-700's >> SD744T
Stealth: CA-14c >> CA 9200 >> Edirol R-09HR
Ultra stealth: AudioReality >> AudioReality battery box >> Edirol R-09HR
Simple & Sweet!

Online aaronji

  • Site Supporter
  • Trade Count: (9)
  • Needs to get out more...
  • *
  • Posts: 3861
Re: How do you transport caps and mic bodies?
« Reply #17 on: June 14, 2018, 05:10:57 PM »
I also have a Petrol, but it has a lot less structure than an Orca (at least mine, which is basically a soft-sided bag with some padding and I can suspend the recorder a bit).

You can probably find a suitably sized Pelican case, as they come in a million sizes.  They are also rather pricey, though.  Solid, however, as I think you could run the ones that came with my DPA matched pairs over with a truck with no damage...

Offline nak700s

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 634
  • Gender: Male
Re: How do you transport caps and mic bodies?
« Reply #18 on: June 14, 2018, 05:26:36 PM »
I also have a Petrol, but it has a lot less structure than an Orca (at least mine, which is basically a soft-sided bag with some padding and I can suspend the recorder a bit).

You can probably find a suitably sized Pelican case, as they come in a million sizes.  They are also rather pricey, though.  Solid, however, as I think you could run the ones that came with my DPA matched pairs over with a truck with no damage...

The Petrol that I have has pretty hard sides, and the inserts are also strong, so it's great when it's convenient to use, which is most of the time.  Other times, it's all about a backpack... that's too soft to protect equipment.
« Last Edit: June 21, 2018, 01:39:33 PM by nak700s »
Normal: Nakamichi CM-700's >> SD 744T (or) Sony PCM-M10
Normal: Crown CM-700's >> SD 302 >> SD 744T
Fun times: 3 Crown CM-700's >> SD 302 >> SD744T + 2 Nakamichi CM-700's >> SD744T
Stealth: CA-14c >> CA 9200 >> Edirol R-09HR
Ultra stealth: AudioReality >> AudioReality battery box >> Edirol R-09HR
Simple & Sweet!

Offline noahbickart

  • phishrabbi
  • Site Supporter
  • Trade Count: (33)
  • Needs to get out more...
  • *
  • Posts: 2554
  • Gender: Male
  • So now I wander over grounds of light...
Re: How do you transport caps and mic bodies?
« Reply #19 on: June 14, 2018, 09:41:14 PM »
I also have a Petrol, but it has a lot less structure than an Orca (at least mine, which is basically a soft-sided bag with some padding and I can suspend the recorder a bit).

You can probably find a suitably sized Pelican case, as they come in a million sizes.  They are also rather pricey, though.  Solid, however, as I think you could run the ones that came with my DPA matched pairs over with a truck with no damage...

The Petrol that I have has pretty hard sides, and the inserts are also strong, so it's great when it's convenient to use, which is most of the time.  Other times, it's all about a backpack...that that's too soft to protect equipment.

You might look at a backpack designed for photographers. I use a tamrac with great success.
Recording:
Capsules: Schoeps mk41v (x2), mk22 (x2), mk3 (x2), mk21 & mk8
Cables: 2x nbob KCY, 1 pair nbob actives, GAKables 10' & 20' 6-channel snakes, Darktrain 2 & 4 channel KCY and mini xlr extensions:
Preamps:    Schoeps VMS 02iub, Naiant IPA, Sound Devices Mixpre6 I
Recorders: Sound Devices Mixpre6 I, Sony PCM m10

Home Playback: Mac Mini> Mytek Brooklyn+> McIntosh MC162> Eminent Tech LFT-16; Musical Fidelity xCan v2> Hifiman HE-4XX / Beyerdynamic DT880

Office Playback: iMac> Grace m903> AKG k701 / Hifiman HE-400

Offline H₂O

  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 5745
  • Gender: Male
Re: How do you transport caps and mic bodies?
« Reply #20 on: June 16, 2018, 09:28:40 PM »
I have since around 2002 transport my rig fully assembled.  I currently have my bodies inside pipe foam and my caps I always put on top in there windscreens.


Never had an issues transporting this way.


When I do run full bodies (when running m221's or m260's) I use a Schoeps wooden box - or the TFunk wooden boxes.
Music can at the least least explain you and at the most expand you
LMA Recordings

List

Offline ycoop

  • Trade Count: (9)
  • Taperssection Member
  • ***
  • Posts: 647
  • Gender: Male
Re: How do you transport caps and mic bodies?
« Reply #21 on: June 18, 2018, 12:38:22 AM »
In case anyone was wondering (which you probably weren't) I went with a cigar caddy for the bodies+one set of attached capsules and then a pelican 1050 case along with a piece of pick and pluck foam for the additional capsules  and shockmounts. Will be much lighter and lower profile than the two wooden boxes.

Thanks for the input.
Mics: Avantone CK-1s, AT853 c+o
Pres: CA9100
Recorders: DR-60d mkII, DR-2d

Offline MBHOTAPER

  • Trade Count: (6)
  • Taperssection Member
  • ***
  • Posts: 754
  • Gender: Male
  • Jam Bands Rock!
Re: How do you transport caps and mic bodies?
« Reply #22 on: June 18, 2018, 05:07:02 PM »
I also have a Petrol, but it has a lot less structure than an Orca (at least mine, which is basically a soft-sided bag with some padding and I can suspend the recorder a bit).

You can probably find a suitably sized Pelican case, as they come in a million sizes.  They are also rather pricey, though.  Solid, however, as I think you could run the ones that came with my DPA matched pairs over with a truck with no damage...

The Petrol that I have has pretty hard sides, and the inserts are also strong, so it's great when it's convenient to use, which is most of the time.  Other times, it's all about a backpack...that that's too soft to protect equipment.

You might look at a backpack designed for photographers. I use a tamrac with great success.
Last couple of years my backpack has become an issue at the gates due to increased security especially at arenas and stadiums. I stated  using this portabrace DSLR dimensions are 13x6 x12 and meets the 12x12x6 requirements if you don't stuff it.
https://m.ebay.com/itm/PortaBrace-SL-DSLRB-Camera-Bag-Retail-249-Sell-49-99-FREE-SHIPPING-Brand-New/192465906109?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3D2b2c51b195a64d249532d7df003f011f%26pid%3D100675%26rk%3D11%26rkt%3D15%26sd%3D222536419795%26itm%3D192465906109&_trksid=p2481888.c100675.m4236&_trkparms=pageci%3Ada006920-7339-11e8-b1a7-74dbd18078c4%7Cparentrq%3A14add6241640a9cae3ae0a76ffe9e7a8%7Ciid%3A1
For the mics I use the mad toto xl hard case for glass (7x3x3).
https://madtoto.com/shop/x-large-tube-case/?attribute_color=Purple&gclid=CjwKCAjwsJ3ZBRBJEiwAtuvtlPinIOEbqHWRLwMavZHtQQHSvx-uwXJhVLrO2qy2mu0K9WPAOfh9JRoCRpEQAvD_BwE

Online aaronji

  • Site Supporter
  • Trade Count: (9)
  • Needs to get out more...
  • *
  • Posts: 3861
Re: How do you transport caps and mic bodies?
« Reply #23 on: June 19, 2018, 09:22:50 AM »
In case anyone was wondering (which you probably weren't) I went with a cigar caddy for the bodies+one set of attached capsules and then a pelican 1050 case along with a piece of pick and pluck foam for the additional capsules  and shockmounts. Will be much lighter and lower profile than the two wooden boxes.

As a note of caution, see this thread about the pick-n-pluck and capsules.  I have used it for a long time now with no issues (with caps attached to bodies), as have others here, but perhaps worth keeping in mind...

Other times, it's all about a backpack...that that's too soft to protect equipment.

How about one of those backpacks specially made for laptops?  The 744T is obviously not exactly laptop shaped, but maybe you can find one that works?

Offline ycoop

  • Trade Count: (9)
  • Taperssection Member
  • ***
  • Posts: 647
  • Gender: Male
Re: How do you transport caps and mic bodies?
« Reply #24 on: June 19, 2018, 11:05:22 AM »
In case anyone was wondering (which you probably weren't) I went with a cigar caddy for the bodies+one set of attached capsules and then a pelican 1050 case along with a piece of pick and pluck foam for the additional capsules  and shockmounts. Will be much lighter and lower profile than the two wooden boxes.

As a note of caution, see this thread about the pick-n-pluck and capsules.  I have used it for a long time now with no issues (with caps attached to bodies), as have others here, but perhaps worth keeping in mind...

Other times, it's all about a backpack...that that's too soft to protect equipment.

How about one of those backpacks specially made for laptops?  The 744T is obviously not exactly laptop shaped, but maybe you can find one that works?

Thanks for the heads up about the foam. Turns out that I miscalculated dimensions and the capsules won’t fit securely in the foam when the shockmounts are in place. I’m going to try out fitting the capsules in the cigar caddy.

Edit:
Final setup. Wrapped the extra foam in gaffer’s tape to mitigate risk of static buildup. Anyone have any ideas for keeping those foam pieces in place in the cigar caddy?
« Last Edit: June 20, 2018, 01:29:42 AM by ycoop »
Mics: Avantone CK-1s, AT853 c+o
Pres: CA9100
Recorders: DR-60d mkII, DR-2d

Offline nak700s

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 634
  • Gender: Male
Re: How do you transport caps and mic bodies?
« Reply #25 on: June 21, 2018, 01:56:12 PM »
In case anyone was wondering (which you probably weren't) I went with a cigar caddy for the bodies+one set of attached capsules and then a pelican 1050 case along with a piece of pick and pluck foam for the additional capsules  and shockmounts. Will be much lighter and lower profile than the two wooden boxes.

As a note of caution, see this thread about the pick-n-pluck and capsules.  I have used it for a long time now with no issues (with caps attached to bodies), as have others here, but perhaps worth keeping in mind...

Other times, it's all about a backpack...that that's too soft to protect equipment.

How about one of those backpacks specially made for laptops?  The 744T is obviously not exactly laptop shaped, but maybe you can find one that works?

I use a cigar case for the mics and I have made custom sized boxes out of heavy cardboard for my shockmounts.  The 744T is the only thing I need additional protection for.  Currently, I wrap it up I a towel, which works fine, but is slower when packing up and takes up too much real estate in the backpack (When using the Petrol Bag, there's no issue).  I'm constantly on the lookout for a sturdy plastic case (or other material) that I can line with 2 layers of thin dense foam for protection.  his will take up less space in the bag as well as be a quick in and out storage box.  Hey, this makes perfect sense in my head! I've considered a photo backpack, as Noah suggested, but find them to be to bulky with not enough space for my needs.  In addition to the usual accessories, I always have a camera with me too, but the case I have for that fits perfectly in the backpack, or can be fit in the Petrol Bag without the camera case.  If not for those BNC plugs, I would have been set, Grrrr!  Note, I only use the backpack when I either need more space than the Petrol Bag or for convenience when traveling, as I can wear it on my back instead of carrying it like a bag.
Normal: Nakamichi CM-700's >> SD 744T (or) Sony PCM-M10
Normal: Crown CM-700's >> SD 302 >> SD 744T
Fun times: 3 Crown CM-700's >> SD 302 >> SD744T + 2 Nakamichi CM-700's >> SD744T
Stealth: CA-14c >> CA 9200 >> Edirol R-09HR
Ultra stealth: AudioReality >> AudioReality battery box >> Edirol R-09HR
Simple & Sweet!

Offline heathen

  • Trade Count: (23)
  • Needs to get out more...
  • *****
  • Posts: 3528
Re: How do you transport caps and mic bodies?
« Reply #26 on: June 21, 2018, 02:12:11 PM »
The 744T is the only thing I need additional protection for.  Currently, I wrap it up I a towel, which works fine, but is slower when packing up and takes up too much real estate in the backpack (When using the Petrol Bag, there's no issue).  I'm constantly on the lookout for a sturdy plastic case (or other material) that I can line with 2 layers of thin dense foam for protection.  his will take up less space in the bag as well as be a quick in and out storage box.  Hey, this makes perfect sense in my head!
This seems like it would fit a 744T comfortably, with some layers of foam as well: https://www.amazon.com/Plano-Tactical-Custom-Ammo-Box/dp/B0747JPRW4
Mics: AT4050ST | AT4031 | AT853 (C/SC) | Line Audio CM3 | Sennheiser e614 | Sennheiser MKE2 | DPA 4061 Pre: CA9200 Decks: Zoom F8 | Roland R-05

Offline nak700s

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 634
  • Gender: Male
Re: How do you transport caps and mic bodies?
« Reply #27 on: June 21, 2018, 03:07:06 PM »
The 744T is the only thing I need additional protection for.  Currently, I wrap it up I a towel, which works fine, but is slower when packing up and takes up too much real estate in the backpack (When using the Petrol Bag, there's no issue).  I'm constantly on the lookout for a sturdy plastic case (or other material) that I can line with 2 layers of thin dense foam for protection.  his will take up less space in the bag as well as be a quick in and out storage box.  Hey, this makes perfect sense in my head!
This seems like it would fit a 744T comfortably, with some layers of foam as well: https://www.amazon.com/Plano-Tactical-Custom-Ammo-Box/dp/B0747JPRW4

LOLOLOLOLOLOL...you a funny guy! ;-)
Normal: Nakamichi CM-700's >> SD 744T (or) Sony PCM-M10
Normal: Crown CM-700's >> SD 302 >> SD 744T
Fun times: 3 Crown CM-700's >> SD 302 >> SD744T + 2 Nakamichi CM-700's >> SD744T
Stealth: CA-14c >> CA 9200 >> Edirol R-09HR
Ultra stealth: AudioReality >> AudioReality battery box >> Edirol R-09HR
Simple & Sweet!

 

RSS | Mobile
Page created in 0.284 seconds with 52 queries.
© 2002-2024 Taperssection.com
Powered by SMF