Become a Site Supporter and Never see Ads again!

Author Topic: 4 channel recording to a two channel recorder with a mixer?  (Read 7361 times)

0 Members and 1 Guest are viewing this topic.

Offline ghellquist

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 477
  • Gender: Male
Re: 4 channel recording to a two channel recorder with a mixer?
« Reply #15 on: November 21, 2006, 01:18:14 AM »
Hi kuuan,
     missed your post.

You are dead on with panning - I referr to the pan pot on a mixer. In the center the signal goes equally to both sides.

With a little mixer you should be able to do a lot of experimenting with your mics. There is a bit of conventional wisdom in the area, but as always the only way to learn is to make all the experiments yourself. Good tools makes life so much easier, a few mics, a mixer, good headphones, but I guess you already know this, and what kind of hole it makes in the wallet. After a while in gear land the appetite seems to grow, my mic locker and the accompaning bank loan is testiment to that.

Gunnar

 

RSS | Mobile
Page created in 0.048 seconds with 25 queries.
© 2002-2024 Taperssection.com
Powered by SMF