Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: Eco-charge Battery Question/Powering DR-07?  (Read 1930 times)

0 Members and 1 Guest are viewing this topic.

Offline taperwheeler

  • Trade Count: (5)
  • Taperssection Member
  • ***
  • Posts: 496
  • Gender: Male
Eco-charge Battery Question/Powering DR-07?
« on: May 01, 2009, 07:28:11 AM »
I have an old school pair of ecocharge batteries that were originally used to power my v3 via 12v connector and sony m1 via it's 4.7v output.  I'm looking to purchase a tascam dr-07 or dr-1 and hoping that the 4.7v output of the battery will power the unit.  Looking at the specs of the power supply that can be used, says it provides 5v.  Will my batts not be able to power those units?
« Last Edit: May 03, 2009, 07:24:21 PM by taperwheeler »
Logged
Mics: SP-CMC-8 AT933 Body 4.7K mod AT853 (c, sc) U853 (h) Microline Shotguns
Pres: CA 9100, SP-Preamp
Recorders: MT2 , Tascam DR-07, PCM-M10, PCM A10

Offline taperwheeler

  • Trade Count: (5)
  • Taperssection Member
  • ***
  • Posts: 496
  • Gender: Male
Re: Eco-charge Battery Question/Powering DR-07?
« Reply #1 on: May 04, 2009, 03:55:42 PM »
No thoughts on this?
Logged
Mics: SP-CMC-8 AT933 Body 4.7K mod AT853 (c, sc) U853 (h) Microline Shotguns
Pres: CA 9100, SP-Preamp
Recorders: MT2 , Tascam DR-07, PCM-M10, PCM A10
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.055 seconds with 30 queries.
© 2002-2024 Taperssection.com
Powered by SMF