Become a Site Supporter and Never see Ads again!

Author Topic: SP-SPSB-10 bbox experiences?  (Read 3171 times)

0 Members and 1 Guest are viewing this topic.

Offline pafnuzzi

  • Trade Count: (6)
  • Taperssection Regular
  • **
  • Posts: 90
SP-SPSB-10 bbox experiences?
« on: April 23, 2010, 05:58:25 PM »


Thanks for answers.

« Last Edit: May 27, 2011, 03:26:50 PM by pafnuzzi »
Recorder: Sony PCM M10 red

Offline acidjack

  • Site Supporter
  • Trade Count: (37)
  • Needs to get out more...
  • *
  • Posts: 5845
  • Gender: Male
Re: SP-SPSB-10 bbox experiences?
« Reply #1 on: April 24, 2010, 12:51:09 PM »
I've got one and I like it... I don't use it as often as you do, probably. It being plastic, it is more prone to damage, but I'm usually pretty careful. I keep it in my back pocket when recording and keep it in a plastic bag when not in use.  Sorry to hear yours is not working. I agree that the 12V really improves the sound, plus I like the smaller size.

I suspect if you asked it's not inconceivable that one of the wizards on here could do you up a 12V box.  Most people don't like it because it uses that weird battery, but I don't mind that either.
Mics: Schoeps MK4V, MK41V, MK5, MK22> CMC6, KCY 250/5, KC5, NBob; MBHO MBP603/KA200N, AT 3031, DPA 4061 w/ d:vice, Naiant X-X, AT 853c, shotgun, Nak300
Pres/Power: Aerco MP2, tinybox v2  [KCY], CA-UBB
Decks: Sound Devices MixPre 6, Zoom F8, M10, D50

My recordings on nyctaper.com: http://www.nyctaper.com/?tag=acidjack | LMA: http://www.archive.org/bookmarks/acidjack | twitter: http://www.twitter.com/acidjacknyc | Soundcloud: https://soundcloud.com/acidjacknyc

Offline pafnuzzi

  • Trade Count: (6)
  • Taperssection Regular
  • **
  • Posts: 90
Re: SP-SPSB-10 bbox experiences?
« Reply #2 on: April 24, 2010, 01:31:08 PM »
Hi

Well that´s the point I also did not use it very often and surely handle it also with care but anyway the input jack does not seem to be very solid  :-[
Maybe the model with bass roll off SP offers is more solid with the metal input jack...?
Recorder: Sony PCM M10 red

Offline fmaderjr

  • Trade Count: (16)
  • Taperssection All-Star
  • ****
  • Posts: 1966
Re: SP-SPSB-10 bbox experiences?
« Reply #3 on: April 24, 2010, 03:03:52 PM »
Any other opinions on whether 12 volts makes most mini-mics sound better than 9 volts? I have a hard time believing it based on what I've read here, how good all my mics sound powered by 9 volts, and my belief that if this were true Chris Church would not use 9 volts to power his preamps and battery boxes. Chris really knows the mics we typically use here as well as his own.
AT853's (all caps)/CM-300 Franken Naks (CP-1,2,3)/JBMod Nak 700's (CP-701,702) > Tascam DR-680
Or Sonic Studios DSM-6 > M10

Offline OOK

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 2727
  • Gender: Male
  • formerly OtherOneK
Re: SP-SPSB-10 bbox experiences?
« Reply #4 on: April 25, 2010, 01:20:51 AM »
IT is true that Churches mics are powered by 9 volts but he mods his mics with a 4.7resistor to handle the loud stuff...
DPA/HEB 4060's > R09HR
MBHO648/KA100Lk/KA200/KA300/KA500 > SD702

Offline pafnuzzi

  • Trade Count: (6)
  • Taperssection Regular
  • **
  • Posts: 90
Re: SP-SPSB-10 bbox experiences?
« Reply #5 on: April 25, 2010, 02:23:50 AM »
I only can say that my CMC-8 sounds better more direct and clearer (difficult to express in English for me as Austrian... ::)  with the 12 Volt bbox but anyway my ugly bbox is very good and beside the smallest setup... I think the 9 VOlt batteries have a longer life than the 12 Volt...

pafnuzzi
Recorder: Sony PCM M10 red

Offline Ziggz

  • Trade Count: (12)
  • Taperssection Member
  • ***
  • Posts: 479
Re: SP-SPSB-10 bbox experiences?
« Reply #6 on: April 25, 2010, 07:39:39 AM »
No problems with my SP-SPSB-11, which is the rolloff model.

 

RSS | Mobile
Page created in 0.076 seconds with 35 queries.
© 2002-2024 Taperssection.com
Powered by SMF