Become a Site Supporter and Never see Ads again!

Author Topic: Can you clean XLR inputs?  (Read 2630 times)

0 Members and 1 Guest are viewing this topic.

Offline yates7592

  • Trade Count: (12)
  • Taperssection Member
  • ***
  • Posts: 694
  • Gender: Male
Can you clean XLR inputs?
« on: May 28, 2012, 03:20:21 AM »
Does anybody know how to clean XLR inputs, or if it is possible to do so? I am used to cleaning my 1/8" mini plugs with isopropanol, but I would imagine the procedure is different for XLR's.

Offline ScoobieKW

  • Trade Count: (3)
  • Taperssection All-Star
  • ****
  • Posts: 1664
    • ScoobieSnax Audio Archive
Re: Can you clean XLR inputs?
« Reply #1 on: May 28, 2012, 04:04:24 AM »
Alcohol is fine. Q-tip or paintbrush.

 
Busman BSC1, AT853 (O,C),KAM i2 Chuck Mod (C), Nak 300 (C),
M10, UA-5, US-1800, Presonus Firepod

http://kennedy-williams.net/scoobiesnax/

Offline DigiGal

  • AES Associate Member
  • Trade Count: (30)
  • Needs to get out more...
  • *****
  • Posts: 2583
  • Gender: Female
  • Stay healthy and safe!
    • DigiGal Internet Archive Recordings
Re: Can you clean XLR inputs?
« Reply #2 on: May 28, 2012, 10:43:53 AM »
A comment on cleaning: alcohol contains water so if using any product containing alcohol be sure the connections dry completely.  Products better than alcohol to clean the connector contacts is stabilant 22 or deoxit gold.
« Last Edit: May 28, 2012, 02:29:11 PM by DigiGal »
Mics: AKG CK91/CK94/CK98/SE300 D-330BT | DPA 4060 4061 4266 | Neumann TLM 103 | Senn ME66/K6/K6RD MKE2 MD421 MD431 | Shure VP88 SM7B SM63L SM58 Anniversary Cables: Gotham GAC-4/1 Quad w/Neutrik EMC | Gotham GAC-2pair w/AKG MK90/3 connectors | DigiGal AES>S/PDIF cable Preamp: SD MixPre-D Recorders: SD MixPre 6 | Marantz PMD 661 Edit: 2011 27" 3.4GHz Quad i7 iMac High Sierra | 2020 13" MBA Quad i7 Catalina | Wave Editor | xACT | Transmission | FCP X 

 

RSS | Mobile
Page created in 0.06 seconds with 28 queries.
© 2002-2024 Taperssection.com
Powered by SMF