Taperssection.com
Gear / Technical Help => Ask The Tapers => Topic started by: Kevin on September 07, 2003, 05:43:29 PM
-
Im looking for a spdif cable to connect my pcm-r300 dat to my computer and was just wondering what yall suggest. Oh and I need it to be around 6ft. thanks in advance
Kevin
-
or at the shack, quick
http://www.radioshack.com/product.asp?catalog%5Fname=CTLG&category%5Fname=CTLG%5F007%5F002%5F003%5F003&product%5Fid=15%2D1089
jr
-
+T for the help, ive never put a spdif cable together, is it difficult? any links to instructions?
-
what do you think of this http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3037466849&category=14965
is that the cable you were suggesting?
-
I think im just going to buy that one just a lot easier since ive never dont it before and need one quickly. Thanks again for the help guys ;)
-
or at the shack, quick
http://www.radioshack.com/product.asp?catalog%5Fname=CTLG&category%5Fname=CTLG%5F007%5F002%5F003%5F003&product%5Fid=15%2D1089
jr
I've bought stuff from that guy. He does good work.
-
Crimping would be way more fun if the little tool for it didn't cost like $60. Could you do the same job with a wire stripper and pliers or is it not even close?
-Matt
-
for a spdif, i would not crimp, i would solder. crimping leaves a little too much room for error.
jr
-
crazy shit :)
-
...I just use my 7-pin and it goes directly into my SoundBlaster Audigy2 soundcard...pimp shit...
Peace
-
don't say sound blaster around here... ;) you'll get in trouble
-
don't say sound blaster around here... ;) you'll get in trouble
:-X :-X ::) ::)
-
also the 7-pn is or your portable not ahome unit ;)