Become a Site Supporter and Never see Ads again!

Author Topic: 5-pin XLR to stereo miniplug cable (for RODE NT4 mic)  (Read 5871 times)

0 Members and 1 Guest are viewing this topic.

Offline Eldo Rado

  • Trade Count: (1)
  • Taperssection Newbie
  • *
  • Posts: 8
  • Gender: Male
5-pin XLR to stereo miniplug cable (for RODE NT4 mic)
« on: November 15, 2013, 08:41:12 PM »
My first post on Taperssection... good to be here.

Anyhow, the ten year old cable that came with my Rode NT4 finally shorted out at the stereo miniplug end.  I'm wondering if any of you can recommend a suitable cable replacement (I use it with my Sony PCM M10).  The Rode web site doesn't even list it as an accessory any more.

I found this one on B&H that looks like it might work, but that's just a guess (and it's way too short at only 12" in length): http://www.bhphotovideo.com/c/product/313874-REG/Beyerdynamic_470643_MVK72_K3_Cable.html

Have any of you replaced the original 5 pin XLR to stereo miniplug cable and had a good result? Can you recommend?

Many thanks.

« Last Edit: November 15, 2013, 10:26:55 PM by Eldo Rado »
Killing Confusion By Eliminating Options

Offline Hypnocracy

  • Site Supporter
  • Trade Count: (46)
  • Needs to get out more...
  • *
  • Posts: 2011
  • Hypnocratic Missionary
    • Hypno on teh LMA
_____________
hypno on teh Archive

This must be heaven -- 'cause here's where the rainbow ends
If this ain't the real thing, then it's close enough to pretend

Offline tgakidis

  • Trade Count: (552)
  • Needs to get out more...
  • *****
  • Posts: 5749
  • Gender: Male
    • My Recordings on the Archive:
Re: 5-pin XLR to stereo miniplug cable (for RODE NT4 mic)
« Reply #2 on: November 16, 2013, 10:47:50 AM »
I can build you a custom short or long 5pin > TRS mini cable, LMK.
GAKables: Custom XLR, Digi & Batt Cables http://taperssection.com/index.php?topic=133186.0

Mics: Schoeps CMC6 x 4, Schoeps CMC1K x 2 / Schoeps KC 5G x 2 / Schoeps MK4,MK41,MK21,MK22 x 2 / Austrian Audio OC818 Dual Set+ / Telefunken TF-11 x 2 / Telefunken ELA M 260 x 4 / Telefunken M960FS x 2 / TK60,TK61,TK62 x 2 / Telefunken M60,TK60 x 2 / AKG c426b / AKG c34 / nBob AKG Actives>PFA x 4 / CK61,CK63,CK8 x 2 / AT853 4.7k Mod (Card,Sub)
Pres: Sonosax SX-AD8+ / Sonosax SX-M2D2 / Sonosax SX-M2 / Lunatec V3
Recs: Sonosax SX-R4+ / Sound Devices MixPre-6ii / Marantz PMD-661 / Roland R-07 / Zoom F3

My Recordings: https://archive.org/search.php?query=taper%3A%28Gakidis%29&sort=-da

Offline jagraham

  • Trade Count: (20)
  • Needs to get out more...
  • *****
  • Posts: 2996
  • Gender: Male
Re: 5-pin XLR to stereo miniplug cable (for RODE NT4 mic)
« Reply #3 on: November 23, 2013, 11:31:08 AM »
The Sony ECM-MS957 comes with one of these FYI.
Mics: Nak CM-300s, Nak CM-100s, CP-1s, CP-2s, AT-853s(Cards, Hypers, Omnis) CA-14s(Cards, Omnis)
Pres: CA STC-9200, CA-UBB
Recorders: Tascam DR-70D, DR-2D, Edirol R-09

ISO: 1 Teac ME-120, CP-3 Caps, AT-853 Subcard Caps

Offline mepaca

  • Trade Count: (10)
  • Taperssection Member
  • ***
  • Posts: 268
  • taperssection member
Re: 5-pin XLR to stereo miniplug cable (for RODE NT4 mic)
« Reply #4 on: April 24, 2014, 10:26:47 PM »

Offline tapetaper

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 1
Re: 5-pin XLR to stereo miniplug cable (for RODE NT4 mic)
« Reply #5 on: August 27, 2014, 11:15:40 PM »
I can build you a custom short or long 5pin > TRS mini cable, LMK.

hello,
i am looking for a 5 pin xlr --> stereo mini plug in 3.5' length for use with rode nt4 microphone connected to sony pcm-d50 recorder.
do you have a website or email address i can contact you? ...i just signed up and i am unable to send personal messages...
thanks so much!

 

RSS | Mobile
Page created in 0.072 seconds with 35 queries.
© 2002-2024 Taperssection.com
Powered by SMF