Taperssection.com

Gear / Technical Help => Remote Power => Topic started by: Drgiggles1 on March 19, 2012, 05:25:42 PM

Title: Setting charging and discharging rates manually - Maha MH-C9000 question
Post by: Drgiggles1 on March 19, 2012, 05:25:42 PM

Recently got a Maha MH-C9000 charger and was wondering if inserting Maha Powerex 2700 mAh AA's what rates do you recommend in the following 3 modes ?

Refresh and Analyze mode
Cycle mode
Discharge mode

Charge mode and Break-In mode I have no problem understanding, since really nothing needs to be done manually except for maybe entering the battery capacity. Just not quite sure on the above 3 modes listed. Thanks in advance.

Title: Re: Setting charging and discharging rates manually - Maha MH-C9000 question
Post by: Drgiggles1 on March 20, 2012, 07:00:34 PM

Ok, think I figured it out after reading the instruction sheet for the 15th time over a period of days  ;D
For discharge rate I will use 300MA 540 MA for 2700mAh
For charging rate I will use 1000 MA for 2700 mAh

Any comments will be welcome.