Become a Site Supporter and Never see Ads again!

Author Topic: 9V question  (Read 1466 times)

0 Members and 1 Guest are viewing this topic.

Offline Candace

  • Trade Count: (1)
  • Taperssection Regular
  • **
  • Posts: 93
  • I'm a llama!
9V question
« on: July 13, 2010, 11:09:01 AM »
Hey gang. I've been semi-retired from field recording the last few years ever since my batteries for my Apogee Ad1K went dead (side note; make an offer on the Apogee if interested). I have an Edirol 16 channel mixing board that I sometimes use to record to Cakewalk Sonar Producer or WL4 when I know I can get power. In searching out possible field recording options, I ran across this:

It kind of appeals, since it would link up with Sonar Producer. Do you think it could be powered off of EcoCharges or something similar?

Offline dallman

  • Trade Count: (30)
  • Taperssection All-Star
  • ****
  • Posts: 1706
  • Gender: Male
    • Clifford Morse
Re: 9V question
« Reply #1 on: July 13, 2010, 01:01:06 PM »

It has a 9V input, so you should be fine with the standard eco charge or similar battery set up.
Support Live Music: Tape A Show Today!
Deck>possibly something here> Mics

Offline SmokinJoe

  • Trade Count: (63)
  • Needs to get out more...
  • *****
  • Posts: 4201
  • Gender: Male
  • "75 and sunny"... life is so much simpler.
    • uploads to
Re: 9V question
« Reply #2 on: August 02, 2010, 07:31:14 PM »
Most of us use 9V "DVD Player Battery" sometimes called "Walmart Battery" (although they don't sell them at walmart any more).  They are sold under a bunch of different brand names, but they all look the same.  A couple of years ago they were 4500mah, then 5400, now 6000 are pretty common and probably bigger.  Prices range from $10 to $90.  They will power a typical UA-5, or V3, or R4 for several hours.  Here is one example.

Note that the Cakewalk recorder will allow you to record 8 inputs when you are hooked to a computer, but if you take it portable and write to an SD card it's only 2 track.  That line "Even record a mix of your set directly to the SD-card" is a bit misleading.  If you only want to record 2 channels, there are plenty of other (cheaper) options, and if you want more channels then you need a computer and would probably use what you already have.
« Last Edit: August 02, 2010, 07:44:35 PM by SmokinJoe »
Mics: Schoeps MK4 & CMC5's / Gefell M200's & M210's / ADK-TL / DPA4061's
Pres: V3 / ST9100
Decks: Oade Concert Mod R4Pro / R09 / R05
Big Rig: split snake > Focusrite & Presonus Pres > ADAT > Alesis HD-24 > Protools 11
Daughter's rig:  AT4050ST > Busman Hybrid R4
Photo: Nikon D700's, 2.8 Zooms, and Zeiss primes
Playback: Raspberry Pi > Modi2 Uber > Magni2 > HD650


RSS | Mobile
Page created in 0.07 seconds with 44 queries.
© 2002-2019
Powered by SMF