Become a Site Supporter and Never see Ads again!

Author Topic: Aeta PSP3: DC power voltage??  (Read 1952 times)

0 Members and 1 Guest are viewing this topic.

Online yug du nord

  • ..Face plant into rock..
  • Trade Count: (54)
  • Needs to get out more...
  • *****
  • Posts: 5155
  • made with natural flavor
Aeta PSP3: DC power voltage??
« on: May 04, 2013, 10:38:47 AM »
I'm finding mixed results when searching for proper info.....  anyone know??

6V-12V (15V maximum)
http://www.taperssection.com/reference/pdf/Manual_AetaPSP3.pdf

3.5V-12V
http://www.posthorn.com/Aeta_3.html

The actual unit says 9V maximum. 
The 9V DVD batteries work great, but I'd like to use lowest possible voltage that is safe in order to maximize battery longevity.
It would be sweet if it could safely run on 5V.

Thanks!
« Last Edit: May 04, 2013, 10:58:25 AM by uncleyug »
.....got a blank space where my mind should be.....

Online yug du nord

  • ..Face plant into rock..
  • Trade Count: (54)
  • Needs to get out more...
  • *****
  • Posts: 5155
  • made with natural flavor
Re: Aeta PSP3: DC power voltage??
« Reply #1 on: May 17, 2013, 08:39:09 AM »
Can anyone tell me that if it is powered ON with 5V DC..  can/will it under-perform?
It powers ON with 5V DC, but I have not tried to run mics yet, or have not turned the phantom power on yet with that voltage.
.....got a blank space where my mind should be.....

Offline kingkita

  • Trade Count: (49)
  • Taperssection Member
  • ***
  • Posts: 430
Re: Aeta PSP3: DC power voltage??
« Reply #2 on: May 17, 2013, 08:54:18 AM »
Hey guy I run mine with a regular DVD battery 9 volt the psp3 will run forever off a DVD battery.

Online yug du nord

  • ..Face plant into rock..
  • Trade Count: (54)
  • Needs to get out more...
  • *****
  • Posts: 5155
  • made with natural flavor
Re: Aeta PSP3: DC power voltage??
« Reply #3 on: May 21, 2013, 04:07:01 PM »
Yeah..  but a stable 5V would be cooler!
.....got a blank space where my mind should be.....

Offline tbone65

  • Trade Count: (4)
  • Taperssection Member
  • ***
  • Posts: 369
Re: Aeta PSP3: DC power voltage??
« Reply #4 on: August 06, 2013, 07:18:49 PM »
i have run mics on 5 volts with a psp3. sounds fine but if you compare it to 9 volts  you will hear a big difference. stick with the 9 volt dvd battery. it will run a psp3 for 10 hours.hope this helps

Offline page

  • Trade Count: (25)
  • Needs to get out more...
  • *****
  • Posts: 8392
  • Gender: Male
  • #TeamRetired
Re: Aeta PSP3: DC power voltage??
« Reply #5 on: August 07, 2013, 11:27:18 AM »
i have run mics on 5 volts with a psp3. sounds fine but if you compare it to 9 volts  you will hear a big difference. stick with the 9 volt dvd battery. it will run a psp3 for 10 hours.hope this helps

can you elaborate on the differences you heard?

The sonosax behaves differently based on what voltage you feed it, but that's headroom capabilities, not sonics.
"This is a common practice we have on the bus; debating facts that we could easily find through printed material. It's like, how far is it today? I think it's four hours, and someone else comes in at 11 hours, and well, then we'll... just... talk about it..." - Jeb Puryear

"Nostalgia ain't what it used to be." - Jim Williams

 

RSS | Mobile
Page created in 0.075 seconds with 47 queries.
© 2002-2019 Taperssection.com
Powered by SMF