Become a Site Supporter and Never see Ads again!

Author Topic: TinyBox output voltage and AT853 mics  (Read 1636 times)

0 Members and 1 Guest are viewing this topic.

Offline Falconidave

  • Trade Count: (30)
  • Taperssection Member
  • ***
  • Posts: 367
  • Gender: Male
  • "I went to too many concerts" said no one ever!
TinyBox output voltage and AT853 mics
« on: July 26, 2013, 03:32:24 PM »
Hi all,

I'm considering buying a used TinyBox and wondering if 16 volts is too much output voltage to power my AT853, 943 mics via 3-wire minxlr.
I'll be running those into a Sony M10 via miniplug.

Thanks in advance,

David
Mics: Schoeps MK41; AT853(3-wire)(c,h,o); AT943(c,o); Audix M1290 (h); AT933(3-wire)(c,h,o); AT831(3-wire)(c); Shure 185(c); Sony ECM-166BMP (o); Sony ECM-166BC (c); CA-14(c); CA-11(c,o)
Preamps: BabyNbox; Naiant Tinybox v2.3
Recorders: Sony PCM-A10; Roland R-07; Zoom H6; Sony PCM-D50; Sony PCM-M10; Edirol R-09HR; Sony MZ-RH1
Video:  Panasonic HDC-TM700 HD; Canon PowerShot SX50 HD; Sony DSC-HX50V

Offline jbell

  • TDS
  • Trade Count: (143)
  • Needs to get out more...
  • *****
  • Posts: 4162
  • Gender: Male
  • Spreadicated
Re: TinyBox output voltage and AT853 mics
« Reply #1 on: July 26, 2013, 03:39:02 PM »
Could use phantom adapters to step down to 9v!

Hi all,

I'm considering buying a used TinyBox and wondering if 16 volts is too much output voltage to power my AT853, 943 mics via 3-wire minxlr.
I'll be running those into a Sony M10 via miniplug.

Thanks in advance,

David
Microtech Gefell M20's> Nbob KCY> Naiant PFA(60V)> Sound Devices Mixpre-6

 

RSS | Mobile
Page created in 0.051 seconds with 43 queries.
© 2002-2019 Taperssection.com
Powered by SMF