Become a Site Supporter and Never see Ads again!

Author Topic: Mixpre-d> R44  (Read 1518 times)

0 Members and 1 Guest are viewing this topic.

Offline jbell

  • TDS
  • Trade Count: (143)
  • Needs to get out more...
  • *****
  • Posts: 4162
  • Gender: Male
  • Spreadicated
Mixpre-d> R44
« on: July 25, 2014, 11:13:27 AM »
Has anyone run this combo??  Last night I couldn't get a digi signal into the R44, but have run it digi into a 680.  I had a friend stop by and we tested my R44 with his V3 and it works fine.  We couldn't get his R44 to grab a digi signal from the Mixpre-d either.  Test the AES>Coax with the V3 and it works fine.  So I'm not sure what is going on.  Any help would be greatly appreciated.  TIA
« Last Edit: July 25, 2014, 01:07:29 PM by jbell »
Microtech Gefell M20's> Nbob KCY> Naiant PFA(60V)> Sound Devices Mixpre-6

Offline jbell

  • TDS
  • Trade Count: (143)
  • Needs to get out more...
  • *****
  • Posts: 4162
  • Gender: Male
  • Spreadicated
Re: Mixpre-d> R44
« Reply #1 on: July 25, 2014, 12:18:51 PM »
After further investigations I found the R44 will read the Mixpre-d at 24/96!  It won't pass a signal at 24/44.1 or 24/48, which seems odd. 
Microtech Gefell M20's> Nbob KCY> Naiant PFA(60V)> Sound Devices Mixpre-6

Offline Gawain Hewitt

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 2
Re: Mixpre-d> R44
« Reply #2 on: July 26, 2014, 04:34:42 AM »
That's odd, I run a Sound Devices USB Pre 2 into an R4 and it's very happy at 24/44.1

 

RSS | Mobile
Page created in 0.059 seconds with 44 queries.
© 2002-2019 Taperssection.com
Powered by SMF