Become a Site Supporter and Never see Ads again!

Author Topic: Adobe Audition batch process question  (Read 1072 times)

0 Members and 1 Guest are viewing this topic.

Offline JackoRoses

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2810
  • Gender: Male
  • lost cause
Adobe Audition batch process question
« on: December 03, 2017, 01:30:23 PM »
This is dumb, yet I can't get adobe to save files when I go through the batch process.
I have destination folder set correctly. Adobe process the files, or at least shows it's processing them. I see the files being loaded/processed.
But the destination folder remains empty, no errors.
I have attempted to save it in the destination folder, changing the file name in the source folder.
I've changed the file permissions on the new folder I want the files to go to. Plenty of HDD space to save.
Nothing I attempt seems to have any difference. I've googled/tapersectioned this issue and no luck there either.
Maybe a guru here can shed light on my ignorance.
I never had this problem before, but this is a fresh install and it's been years since I set adobe up.
I'm obviously missing something obvious.
This is Adobe Audition 3 if it helps/matters.
edit to add : I can save manually anywhere I point it to save to.
« Last Edit: December 03, 2017, 03:17:56 PM by JackoRoses »
http://www.archive.org/bookmarks/jackoroses
AKG ck61's/ck62's/ck63's/480b's > zaolla's/Dogstar silver cables > optimod V3  > zaolla spdif> HD-P2
"None are more hopelessly enslaved than those who falsely believe they are free. "
Johann Wolfgang von Goethe

Big Brother is here and he is watching you.

Offline Ben Turnbull

  • Don't ask me about Audacity...
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 9084
  • Gender: Male
  • A Clark Nova ate my lunch... Don't ask, just pee
Re: Adobe Audition batch process question
« Reply #1 on: December 03, 2017, 05:01:16 PM »
"I have attempted to save it in the destination folder, changing the file name in the source folder. "

I'm not sure how or why you need to change the name in the source folder. If you've pointed to a different destination folder there is no problem of confusion.

Only seeing two shows a month now...
-My name is Ben, and I'm an AQhaulic ranting hysterically in my dotage ...
Read "Toward the End of Time" by Updike to know my name sake.
Official Archivist for Jazz Central Studios, MinniMN
DPA4021/SKM140/NakCM1k/ADK A51s/Countryman B3/ATes943/SPc4(och)/S'lux s502... >
TinyBox OT> PCM-M10/DR-680/R4/T+mod UA5 needs attention

Offline JackoRoses

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2810
  • Gender: Male
  • lost cause
Re: Adobe Audition batch process question
« Reply #2 on: December 03, 2017, 05:10:14 PM »
"I have attempted to save it in the destination folder, changing the file name in the source folder. "

I'm not sure how or why you need to change the name in the source folder. If you've pointed to a different destination folder there is no problem of confusion.
I've tried both ways is what I was attempting to say.
First by selecting a new destination folder, when that wouldn't work, I figured I might as well try saving it in the source folder and setting the name different in the batch process window. I didn't want to overwrite my original files. So that is why I tried getting audition to change the file name.
In this case I have 24 bit files (original) and I'm attempting to batch process dither/downsample to 16 bit.
neither process would result in a saved file.
Sorry for any confusion.
http://www.archive.org/bookmarks/jackoroses
AKG ck61's/ck62's/ck63's/480b's > zaolla's/Dogstar silver cables > optimod V3  > zaolla spdif> HD-P2
"None are more hopelessly enslaved than those who falsely believe they are free. "
Johann Wolfgang von Goethe

Big Brother is here and he is watching you.

Offline if_then_else

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 348
Re: Adobe Audition batch process question
« Reply #3 on: December 04, 2017, 01:28:47 AM »
"I have attempted to save it in the destination folder, changing the file name in the source folder. "

I'm not sure how or why you need to change the name in the source folder. If you've pointed to a different destination folder there is no problem of confusion.
I've tried both ways is what I was attempting to say.
First by selecting a new destination folder, when that wouldn't work, I figured I might as well try saving it in the source folder and setting the name different in the batch process window. I didn't want to overwrite my original files. So that is why I tried getting audition to change the file name.
In this case I have 24 bit files (original) and I'm attempting to batch process dither/downsample to 16 bit.
neither process would result in a saved file.
Sorry for any confusion.

Obvious question: Are there any log files in Audition 3 that might shed some light on your issue?
Not sure if the troubleshooting guide also applies to this old version but it might be a starting point
https://forums.adobe.com/thread/962397

 

RSS | Mobile
Page created in 0.079 seconds with 46 queries.
© 2002-2019 Taperssection.com
Powered by SMF