Become a Site Supporter and Never see Ads again!

Author Topic: quick SBD>v3 question!  (Read 4030 times)

0 Members and 1 Guest are viewing this topic.

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40689
  • Gender: Male
  • Taperus Maximus
quick SBD>v3 question!
« on: March 16, 2005, 03:09:36 PM »
so does the -20db pad need engaged for this to normally work right ???

or can i roll straight to the show and just run like i would w/ mics ???

would i be better off running rca>jb3 line in ???

what would yinz do ???

thanks,
 bean
Recording Gear:
Schoeps MK 4 (MP) & MK 41V (MP) Capsules ->
Schoeps 250/0 KCY's X2 ->
Naiant +60v/Low Noise PFA's x2 ->
DarkTrain Right Angle Stubby XLR's x2 ->
Sound Devices MixPre-6 & MixPre-3 ->
SanDisk 128gb Extreme Pro & 64gb Ultra Plus

Portable Playback Gear:
Campfire Audio Andromeda & Dorado IEM's ->
Linum G2 SuperBax & Bax 3.5mm | FiiO LC 2.5c 2.5mm ->
Shanling Audio M5s | Sony NW-A35 DAP's

DAW:
Dell Inspiron 5570-5521 SLV Laptop
(Pentium i5/8gb RAM/256gb SSD)

http://www.archive.org/bookmarks/diskobean | http://www.archive.org/bookmarks/Bean420 | http://bt.etree.org/mytorrents.php

Offline MattD

  • Taper Emeritus
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4641
  • Gender: Male
Re: quick SBD>v3 question!
« Reply #1 on: March 16, 2005, 03:11:45 PM »
I'd guess the pad would help, as SBD level signals are usually hotter than mic levels. The V3 gain is clean, so why not play it safe?

Don't engage phantom power!
Out of the game … for now?

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40689
  • Gender: Male
  • Taperus Maximus
Re: quick SBD>v3 question!
« Reply #2 on: March 16, 2005, 03:16:30 PM »
I'd guess the pad would help, as SBD level signals are usually hotter than mic levels. The V3 gain is clean, so why not play it safe?

Don't engage phantom power!

ahh, almost forgotthe phanton thing, thankfully, i ALWAYS dis-engage it after each show:)

its just a pain to get my v3 out of its cage, tomake a quick adjustmentlikethat, but whatever, i'lldo it :)

i just hate to engage the -20db pad and then get there and want to run my mics :(
Recording Gear:
Schoeps MK 4 (MP) & MK 41V (MP) Capsules ->
Schoeps 250/0 KCY's X2 ->
Naiant +60v/Low Noise PFA's x2 ->
DarkTrain Right Angle Stubby XLR's x2 ->
Sound Devices MixPre-6 & MixPre-3 ->
SanDisk 128gb Extreme Pro & 64gb Ultra Plus

Portable Playback Gear:
Campfire Audio Andromeda & Dorado IEM's ->
Linum G2 SuperBax & Bax 3.5mm | FiiO LC 2.5c 2.5mm ->
Shanling Audio M5s | Sony NW-A35 DAP's

DAW:
Dell Inspiron 5570-5521 SLV Laptop
(Pentium i5/8gb RAM/256gb SSD)

http://www.archive.org/bookmarks/diskobean | http://www.archive.org/bookmarks/Bean420 | http://bt.etree.org/mytorrents.php

Offline caymanreview

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 9855
  • Gender: Male
    • shows ive taped  that are in circulation
Re: quick SBD>v3 question!
« Reply #3 on: March 16, 2005, 03:34:15 PM »
what i did was print out the schematic of the v3 internals. cut out the section to contain the -20 pad and highlight the jumpers that need switched. laminated it and taped it to the bottom of my v3

i always pack a small screwdriver. you never know whats gonna happen and you may need the -20 pad

Offline dmonterisi

  • Taper Emeritus
  • Site Supporter
  • Trade Count: (2)
  • Needs to get out more...
  • *
  • Posts: 11963
  • Gender: Male
  • Stomach Full of Regret
Re: quick SBD>v3 question!
« Reply #4 on: March 16, 2005, 03:35:37 PM »
yeah, small screwdriver and a tweezer and it's a 2 minute job...

Offline JackoRoses

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2809
  • Gender: Male
  • lost cause
Re: quick SBD>v3 question!
« Reply #5 on: March 16, 2005, 03:36:14 PM »
what i did was print out the schematic of the v3 internals. cut out the section to contain the -20 pad and highlight the jumpers that need switched. laminated it and taped it to the bottom of my v3

i always pack a small screwdriver. you never know whats gonna happen and you may need the -20 pad
nice idea +T
http://www.archive.org/bookmarks/jackoroses
AKG ck61's/ck62's/ck63's/480b's > zaolla's/Dogstar silver cables > optimod V3  > zaolla spdif> HD-P2
"None are more hopelessly enslaved than those who falsely believe they are free. "
Johann Wolfgang von Goethe

Big Brother is here and he is watching you.

Offline Tim

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 32925
  • Gender: Male
Re: quick SBD>v3 question!
« Reply #6 on: March 16, 2005, 03:36:25 PM »
yeah, small screwdriver and a tweezer and it's a 2 minute job...

two minutes sober or two minutes showber?
I’ve had a few weird experiences and a few close brushes with total weirdness of one sort or another, but nothing that’s really freaked me out or made me feel too awful about it. - Jerry Garcia

Offline caymanreview

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 9855
  • Gender: Male
    • shows ive taped  that are in circulation
Re: quick SBD>v3 question!
« Reply #7 on: March 16, 2005, 03:36:43 PM »
yeah, small screwdriver and a tweezer and it's a 2 minute job...

yep. and with my print out, i can do it in even the worst shape 8)

Offline dmonterisi

  • Taper Emeritus
  • Site Supporter
  • Trade Count: (2)
  • Needs to get out more...
  • *
  • Posts: 11963
  • Gender: Male
  • Stomach Full of Regret
Re: quick SBD>v3 question!
« Reply #8 on: March 16, 2005, 03:39:03 PM »
yeah, small screwdriver and a tweezer and it's a 2 minute job...

two minutes sober or two minutes showber?

depends on the type of showber...could be uh oh spaghettio's...but you can always get there early and see what the scene is before ingesting.

Offline Tim

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 32925
  • Gender: Male
Re: quick SBD>v3 question!
« Reply #9 on: March 16, 2005, 03:39:50 PM »
but you can always get there early and see what the scene is before ingesting.

where's the fun in that?

;)
I’ve had a few weird experiences and a few close brushes with total weirdness of one sort or another, but nothing that’s really freaked me out or made me feel too awful about it. - Jerry Garcia

Offline dmonterisi

  • Taper Emeritus
  • Site Supporter
  • Trade Count: (2)
  • Needs to get out more...
  • *
  • Posts: 11963
  • Gender: Male
  • Stomach Full of Regret
Re: quick SBD>v3 question!
« Reply #10 on: March 16, 2005, 03:41:29 PM »
but you can always get there early and see what the scene is before ingesting.

where's the fun in that?

;)

you're asking the wrong guy, i don't own a rig.

Offline Tim

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 32925
  • Gender: Male
Re: quick SBD>v3 question!
« Reply #11 on: March 16, 2005, 03:45:13 PM »
:flippa:
I’ve had a few weird experiences and a few close brushes with total weirdness of one sort or another, but nothing that’s really freaked me out or made me feel too awful about it. - Jerry Garcia

Offline dmonterisi

  • Taper Emeritus
  • Site Supporter
  • Trade Count: (2)
  • Needs to get out more...
  • *
  • Posts: 11963
  • Gender: Male
  • Stomach Full of Regret
Re: quick SBD>v3 question!
« Reply #12 on: March 16, 2005, 03:45:19 PM »
but you can always get there early and see what the scene is before ingesting.

where's the fun in that?

;)

you're asking the wrong guy, i don't own a rig.

i do have a couple of medals from the 02-04 taping olympics...and one time where i missed the platform, damned pause button.

Offline Tim

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 32925
  • Gender: Male
Re: quick SBD>v3 question!
« Reply #13 on: March 16, 2005, 03:48:36 PM »
but you can always get there early and see what the scene is before ingesting.

where's the fun in that?

;)

you're asking the wrong guy, i don't own a rig.

i do have a couple of medals from the 02-04 taping olympics...and one time where i missed the platform, damned pause button.

hahahaha
I’ve had a few weird experiences and a few close brushes with total weirdness of one sort or another, but nothing that’s really freaked me out or made me feel too awful about it. - Jerry Garcia

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40689
  • Gender: Male
  • Taperus Maximus
Re: quick SBD>v3 question!
« Reply #14 on: March 16, 2005, 03:49:27 PM »
i ALWAYAS carry a screwdriver to fit the v3 just right and i already printed out what i needed to do if ineed to do it at the show, just slide jumpers j3/j4 + j14/j15 INWARD  toward each other, simple as pie :)

thanksguys

+T's
Recording Gear:
Schoeps MK 4 (MP) & MK 41V (MP) Capsules ->
Schoeps 250/0 KCY's X2 ->
Naiant +60v/Low Noise PFA's x2 ->
DarkTrain Right Angle Stubby XLR's x2 ->
Sound Devices MixPre-6 & MixPre-3 ->
SanDisk 128gb Extreme Pro & 64gb Ultra Plus

Portable Playback Gear:
Campfire Audio Andromeda & Dorado IEM's ->
Linum G2 SuperBax & Bax 3.5mm | FiiO LC 2.5c 2.5mm ->
Shanling Audio M5s | Sony NW-A35 DAP's

DAW:
Dell Inspiron 5570-5521 SLV Laptop
(Pentium i5/8gb RAM/256gb SSD)

http://www.archive.org/bookmarks/diskobean | http://www.archive.org/bookmarks/Bean420 | http://bt.etree.org/mytorrents.php

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40689
  • Gender: Male
  • Taperus Maximus
Re: quick SBD>v3 question!
« Reply #15 on: March 16, 2005, 03:52:30 PM »
Bean,

I've run sbd>V3 on a couple of occasions, and never had an issue (both for Ras M.). If I remember correctly I ended up adding 5-10dB of gain.
Grab the tape out of the board, and if its too hot, have them back it down a teence.

+T moke, i'll def try it out normal during sndchck

and i may be able tohave them back them down a bit since im archiving doodis and know them resal well, i'll just tell the soundguy toback her down ge3ntly
Recording Gear:
Schoeps MK 4 (MP) & MK 41V (MP) Capsules ->
Schoeps 250/0 KCY's X2 ->
Naiant +60v/Low Noise PFA's x2 ->
DarkTrain Right Angle Stubby XLR's x2 ->
Sound Devices MixPre-6 & MixPre-3 ->
SanDisk 128gb Extreme Pro & 64gb Ultra Plus

Portable Playback Gear:
Campfire Audio Andromeda & Dorado IEM's ->
Linum G2 SuperBax & Bax 3.5mm | FiiO LC 2.5c 2.5mm ->
Shanling Audio M5s | Sony NW-A35 DAP's

DAW:
Dell Inspiron 5570-5521 SLV Laptop
(Pentium i5/8gb RAM/256gb SSD)

http://www.archive.org/bookmarks/diskobean | http://www.archive.org/bookmarks/Bean420 | http://bt.etree.org/mytorrents.php

Offline keepongoin

  • Trade Count: (4)
  • Needs to get out more...
  • Posts: 5434
  • Gender: Male
Re: quick SBD>v3 question!
« Reply #16 on: March 16, 2005, 03:57:39 PM »
jcaledun and i both ran SBD (balanced signal) >V3>JB3 for yonder shows in oxford, memphis, and knoxville.  no -20 db pad was used... it worked fine...  didn't have to turn up the gain at all though.

“When fascism comes to America, it will be wrapped in the flag and carrying the cross.” Sinclair Lewis: How Fascism Will Come To America (1935)

"Science is facts; just as houses are made of stones, so is science made of facts; but a pile of stones is not a house and a collection of facts is not necessarily science."- Henri Poincare

http://www.archive.org/bookmarks/pierce

Offline caymanreview

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 9855
  • Gender: Male
    • shows ive taped  that are in circulation
Re: quick SBD>v3 question!
« Reply #17 on: March 16, 2005, 04:05:22 PM »
jcaledun and i both ran SBD (balanced signal) >V3>JB3 for yonder shows in oxford, memphis, and knoxville. no -20 db pad was used... it worked fine... didn't have to turn up the gain at all though.



ive watched someone do the same thing with ymsb and clip the shit out of his v3...

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18886
  • Gender: Male
Re: quick SBD>v3 question!
« Reply #18 on: March 16, 2005, 04:06:15 PM »
You know better than to post this in the Open Forum, Bean.   ::)
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

Offline wboswell

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 3413
  • Gender: Male
  • Don't call what you're wearing an outfit
    • Trey Woodruff on guitar
Re: quick SBD>v3 question!
« Reply #19 on: March 16, 2005, 04:23:19 PM »

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40689
  • Gender: Male
  • Taperus Maximus
Re: quick SBD>v3 question!
« Reply #20 on: March 16, 2005, 04:27:31 PM »
You know better than to post this in the Open Forum, Bean. ::)

i know, sorry, needed a real quick q answered, and i gotta keep ya on your toes ;)



whats that william ???
Recording Gear:
Schoeps MK 4 (MP) & MK 41V (MP) Capsules ->
Schoeps 250/0 KCY's X2 ->
Naiant +60v/Low Noise PFA's x2 ->
DarkTrain Right Angle Stubby XLR's x2 ->
Sound Devices MixPre-6 & MixPre-3 ->
SanDisk 128gb Extreme Pro & 64gb Ultra Plus

Portable Playback Gear:
Campfire Audio Andromeda & Dorado IEM's ->
Linum G2 SuperBax & Bax 3.5mm | FiiO LC 2.5c 2.5mm ->
Shanling Audio M5s | Sony NW-A35 DAP's

DAW:
Dell Inspiron 5570-5521 SLV Laptop
(Pentium i5/8gb RAM/256gb SSD)

http://www.archive.org/bookmarks/diskobean | http://www.archive.org/bookmarks/Bean420 | http://bt.etree.org/mytorrents.php

Offline caymanreview

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 9855
  • Gender: Male
    • shows ive taped  that are in circulation
Re: quick SBD>v3 question!
« Reply #21 on: March 16, 2005, 04:34:57 PM »
a flag bean, from football ??? come on now, your slacking

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40689
  • Gender: Male
  • Taperus Maximus
Re: quick SBD>v3 question!
« Reply #22 on: March 16, 2005, 04:36:35 PM »
ok, i just dont get it ;)
Recording Gear:
Schoeps MK 4 (MP) & MK 41V (MP) Capsules ->
Schoeps 250/0 KCY's X2 ->
Naiant +60v/Low Noise PFA's x2 ->
DarkTrain Right Angle Stubby XLR's x2 ->
Sound Devices MixPre-6 & MixPre-3 ->
SanDisk 128gb Extreme Pro & 64gb Ultra Plus

Portable Playback Gear:
Campfire Audio Andromeda & Dorado IEM's ->
Linum G2 SuperBax & Bax 3.5mm | FiiO LC 2.5c 2.5mm ->
Shanling Audio M5s | Sony NW-A35 DAP's

DAW:
Dell Inspiron 5570-5521 SLV Laptop
(Pentium i5/8gb RAM/256gb SSD)

http://www.archive.org/bookmarks/diskobean | http://www.archive.org/bookmarks/Bean420 | http://bt.etree.org/mytorrents.php

spreadheadtom

  • Guest
  • Trade Count: (0)
Re: quick SBD>v3 question!
« Reply #23 on: March 16, 2005, 05:02:54 PM »
yeah, small screwdriver and a tweezer and it's a 2 minute job...

sounds like Daryans love life.

nevermind

Offline leegeddy

  • Trade Count: (1)
  • Taperssection All-Star
  • ****
  • Posts: 1964
  • Gender: Male
Re: quick SBD>v3 question!
« Reply #24 on: March 16, 2005, 05:03:53 PM »
yeah, small screwdriver and a tweezer and it's a 2 minute job...

sounds like Daryans love life.

nevermind

LMAO!!!

another + in 12!!
marc
"I'm a taper, he's a taper. Wouldn't you like to be a taper too?"
"Mics? What mics? This is my hat."

Offline wboswell

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 3413
  • Gender: Male
  • Don't call what you're wearing an outfit
    • Trey Woodruff on guitar
Re: quick SBD>v3 question!
« Reply #25 on: March 16, 2005, 05:13:03 PM »
ok, i just dont get it ;)

Its a penalty flag.  You know, the ref throws a flag after a player commits a foul...

make sense   ??? ??? ;D :P :-* ;) ;)

 8)

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40689
  • Gender: Male
  • Taperus Maximus
Re: quick SBD>v3 question!
« Reply #26 on: March 16, 2005, 05:23:40 PM »
ok, i just dont get it ;)

Its a penalty flag. You know, the ref throws a flag after a player commits a foul...

make sense ??? ??? ;D :P :-* ;) ;)

 8)

gotcha ;)
Recording Gear:
Schoeps MK 4 (MP) & MK 41V (MP) Capsules ->
Schoeps 250/0 KCY's X2 ->
Naiant +60v/Low Noise PFA's x2 ->
DarkTrain Right Angle Stubby XLR's x2 ->
Sound Devices MixPre-6 & MixPre-3 ->
SanDisk 128gb Extreme Pro & 64gb Ultra Plus

Portable Playback Gear:
Campfire Audio Andromeda & Dorado IEM's ->
Linum G2 SuperBax & Bax 3.5mm | FiiO LC 2.5c 2.5mm ->
Shanling Audio M5s | Sony NW-A35 DAP's

DAW:
Dell Inspiron 5570-5521 SLV Laptop
(Pentium i5/8gb RAM/256gb SSD)

http://www.archive.org/bookmarks/diskobean | http://www.archive.org/bookmarks/Bean420 | http://bt.etree.org/mytorrents.php

Offline tim in jersey

  • Site Supporter
  • Trade Count: (8)
  • Needs to get out more...
  • *
  • Posts: 3480
  • Gender: Male
Re: quick SBD>v3 question!
« Reply #27 on: March 16, 2005, 08:18:29 PM »
I keep my V3 in a cage too with a short pair of RA XLR interconnects 'permanently' attached, and taking it apart in the field is something I'd rather not do.

I just keep a pair of these in my bag and use 'em if I get thrown a SBD feed...

http://www.bhphotovideo.com/product/68085/AUAT8202/REG/2487/Audio-Technica_AT8202_In-Line_Attenuator

Offline Tim

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 32925
  • Gender: Male
Re: quick SBD>v3 question!
« Reply #28 on: March 16, 2005, 08:57:20 PM »


I'd like to see the officials throw a few more flags around this place... nice call William 8)
I’ve had a few weird experiences and a few close brushes with total weirdness of one sort or another, but nothing that’s really freaked me out or made me feel too awful about it. - Jerry Garcia

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40689
  • Gender: Male
  • Taperus Maximus
Re: quick SBD>v3 question!
« Reply #29 on: March 17, 2005, 02:02:27 AM »
ummm, no -20db pad needed trhankfully :)

transferring jb3>HD now :)
Recording Gear:
Schoeps MK 4 (MP) & MK 41V (MP) Capsules ->
Schoeps 250/0 KCY's X2 ->
Naiant +60v/Low Noise PFA's x2 ->
DarkTrain Right Angle Stubby XLR's x2 ->
Sound Devices MixPre-6 & MixPre-3 ->
SanDisk 128gb Extreme Pro & 64gb Ultra Plus

Portable Playback Gear:
Campfire Audio Andromeda & Dorado IEM's ->
Linum G2 SuperBax & Bax 3.5mm | FiiO LC 2.5c 2.5mm ->
Shanling Audio M5s | Sony NW-A35 DAP's

DAW:
Dell Inspiron 5570-5521 SLV Laptop
(Pentium i5/8gb RAM/256gb SSD)

http://www.archive.org/bookmarks/diskobean | http://www.archive.org/bookmarks/Bean420 | http://bt.etree.org/mytorrents.php

 

RSS | Mobile
Page created in 0.274 seconds with 57 queries.
© 2002-2019 Taperssection.com
Powered by SMF