Topic: Microphone Madness MM-StereoPreamp. Opinions?

[coolrat33]

Hi and thanks for your fast reply.
Guess you can't go wrong with andy Church Audio equipment

I'm looking for a MM pre-amp or a Church 9100 with 1/8 miniplugs. Hoping to find some used equipment! 

[Dede2002]

Hi and thanks for your fast reply.
Guess you can't go wrong with andy Church Audio equipment

I'm looking for a MM pre-amp or a Church 9100 with 1/8 miniplugs. Hoping to find some used equipment! 

No problem, friend.
You guess right. I'm very happy with my CA-9100  .
+T ( I'm the first one and you never forget the first one, right?))

[taperwheeler]

Just bought a MM-Pre off someone in the yard sale.  Curious what anyone who has experience with the unit thinks about it and any trouble that they've had.  Also curious about the colorization.  Any input would be great.  As somone stated earlier, does seem strange that there are no other posts on the device.

[markrsmith]

What do you think of the MM preamp?  I also have, but haven't used it.  I have the mm-hlsd-1, with the Sony pcm-m10.  Where do you set the preamp levels and recorder levels for loud concerts?  Or should I just use the battery module? thanks for any input..

[Darktrain]

What do you think of the MM preamp?  I also have, but haven't used it.  I have the mm-hlsd-1, with the Sony pcm-m10.  Where do you set the preamp levels and recorder levels for loud concerts?  Or should I just use the battery module? thanks for any input..

I have the hlsc's and go mic in on my m10 for loud rock/metal, no pre or bb neede with great results, only need the pre for quiet stuff

[markrsmith]

Very good, thankyou for the reply. I just got the pcm-m10.  I had the mz-m200 MD, and had great sound with: hlsc-1, mm baterry module, into line-in.  I will be using the pcm-m10 for the first time this week.  I would like to figure out the mm preamp, or just sell the thing if I won't be using it.  I don't record quiet shows much.  So i will try your advice to go mic in. thanx.

[Darktrain]

Very good, thankyou for the reply. I just got the pcm-m10.  I had the mz-m200 MD, and had great sound with: hlsc-1, mm baterry module, into line-in.  I will be using the pcm-m10 for the first time this week.  I would like to figure out the mm preamp, or just sell the thing if I won't be using it.  I don't record quiet shows much.  So i will try your advice to go mic in. thanx.

make sure you use the low sensitivity setting, and also my hlsc's have a 4.7k mod in them which allows for high spl shows, even though the site states 138spl, they need a little help to achieve that

[markrsmith]

Thanks again.  I'll have to try these all out, and see how they sound.  Probably start off with mm-hlsc-1, bb, into line-in on the pcm=m10 at24/48.  Basically trying find out what to do with my mm-preamp, and how to use it.  I guess I had tried it twice, but totally distorted the recording, going line-in. cool.