Become a Site Supporter and Never see Ads again!

Author Topic: R-09HR external power  (Read 12300 times)

0 Members and 1 Guest are viewing this topic.

Online JD

  • Trade Count: (9)
  • Taperssection All-Star
  • ****
  • Posts: 1642
Re: R-09HR external power
« Reply #45 on: November 11, 2009, 01:27:58 PM »
Hare are some pictures of the battery pack I made for my R09hr.

Started with two of these...http://www.radioshack.com/product/index.jsp?productId=2062241

These holders configure two cells in series so each pack gives three volts.
The two packs were then wired in parallel. From what I gather a alkaline
D cell is about 15000 mah so this pack should have a capacity of
30,000mah @ 3vdc.





The two holders gaffer taped together, the wires are soldered and wrapped with shrink wrap.






the two holders with batteries installed






a little tape to hold them in





The battery slugs, made from nylon, drilled and tapped on the end for a 10-24 machine screw. Not that the positive battery screw was filled down so that it would fit into the slot in the R09hr, this polarizes the batteries so that they cannot be put in backwards. The wire are attached via standard hoop sta-kon crimp connectors. I machined the nylon to size in a lathe, but you could easily make something similar with wooden dowls and wood srcrews.






Side view of slugs






Installed, I then put a few pieces of gaffers tape over them to hold all in place. I thought about getting a second battery cover from edirol and modifying it so that it could be used to hold the slugs in and have a place for the wires to exit.


Mics: DPA 4022, 4060; Nevaton MC51, MCE400; Gefell sms2000, m20, m21, m27
Pres: DPA MMA6000; Grace V2; Portico 5012; Sonosax SX-M2
Recorders: Edirol R09hr, Sound Devices 722

Offline beeco

  • Trade Count: (19)
  • Taperssection Member
  • ***
  • Posts: 276
  • Gender: Male
  • Copyright 2008, a production of Camp Totally Lit
Re: R-09HR external power
« Reply #46 on: November 12, 2009, 12:20:59 AM »
+T  Very nice.  Thanks for the pics.
Now you see it:  ADK 51TL,  or MK4/41>KC5>CMC6, or AT4051b/4049a > Wendt X2 > R-09HR
Now you don't:   CA-14c  or DPA4061 > CA ST-9100 > R-09HR


"Wait a minute, this sounds like rock and or roll!" Reverend Lovejoy

Offline tbrown4

  • Site Supporter
  • Trade Count: (45)
  • Needs to get out more...
  • *
  • Posts: 2698
  • Gender: Male
    • Tim's Adventures in Sound
Re: R-09HR external power
« Reply #47 on: May 04, 2011, 10:16:52 PM »
I finally got a chance to read through this thread. So from what I've picked up I need something that outputs exactly 3V. I can make a custom cable without issue, I'm just having a hard time find a battery pack. All the links that I've followed for ebay links or other retails sites are really getting me what I need. Google hasn't given me what I need either.

I'm going to hit up my local RatShack tomorrow or Friday and see what I can find.

In the mean time, does anyone have a direct link to a rechargeable battery pack?
AKG C460Bs/A61s/CK61s or CK63s -> Naiant LittleBox -> Edirol R09-HR

http://timothydavidbrown.blogspot.com/

FS: Dead Muppets. Custom "dead rat" style windscreen covers
$25/pair, shipped. Various color/pattern choices
Currently not building orders, the "shop" is temporarily closed. Accepting names on a waiting list.
http://taperssection.com/index.php?topic=137563.msg1786318




Offline tgakidis

  • Trade Count: (540)
  • Needs to get out more...
  • *****
  • Posts: 5665
  • Gender: Male
    • My Recordings on the Archive:
Re: R-09HR external power
« Reply #48 on: May 05, 2011, 05:21:22 AM »
I run my R09hr off 5v USB power all the time with no issues.  Hit me up and I will make you a cable.
GAKables: Custom XLR, Digi & Batt Cables http://taperssection.com/index.php?topic=133186.0

Mics: Telefunken RFT AR-51 / Telefunken ELA M 260 (tk60,tk61,tk62) / Telefunken M60 / AKG c426b / AKG c414 xls / AKG c414 B-XLS / AKG c460b (ck61,ck62,ck63,ck69,a60,ck1,ck22,ck3,ck8,Blue B6) / nBob AKG Actives>PFA/ nBob AKG Actives>nBox Platinum / Naiant AKG Actives>PFA / AT853 w/ 4.7k Mod (Card,Omni,Sub)
Pre-Amps: Sonosax SX-M2 / Lunatec V3
Recs: Sound Devices MixPre-10T / Sound Devices MixPre-6 / Sony PCM-M10 / Roland R-07

My Recordings: https://archive.org/search.php?query=taper%3A%28Gakidis%29&sort=-date

Offline tbrown4

  • Site Supporter
  • Trade Count: (45)
  • Needs to get out more...
  • *
  • Posts: 2698
  • Gender: Male
    • Tim's Adventures in Sound
Re: R-09HR external power
« Reply #49 on: May 05, 2011, 06:10:50 AM »
I run my R09hr off 5v USB power all the time with no issues.  Hit me up and I will make you a cable.

What kind of USB battery? Any idea on run time? If I go this route I'll definitely be getting you to make me a cable.
AKG C460Bs/A61s/CK61s or CK63s -> Naiant LittleBox -> Edirol R09-HR

http://timothydavidbrown.blogspot.com/

FS: Dead Muppets. Custom "dead rat" style windscreen covers
$25/pair, shipped. Various color/pattern choices
Currently not building orders, the "shop" is temporarily closed. Accepting names on a waiting list.
http://taperssection.com/index.php?topic=137563.msg1786318




Offline tgakidis

  • Trade Count: (540)
  • Needs to get out more...
  • *****
  • Posts: 5665
  • Gender: Male
    • My Recordings on the Archive:
Re: R-09HR external power
« Reply #50 on: May 05, 2011, 06:33:18 AM »
Since my R09hr is not my main recorder I have never tested out run time with any if my USB power sources.  I have a lenmar power port that is 500mah and a battery carriage with a USB out that takes 4 AA batteries.  I use it in the car with a USB cigarette lighter adapter, a computer USB and my tekkeon.  Bottom line is it works with any external battery with a USB power source.  There are tons of options out there.
GAKables: Custom XLR, Digi & Batt Cables http://taperssection.com/index.php?topic=133186.0

Mics: Telefunken RFT AR-51 / Telefunken ELA M 260 (tk60,tk61,tk62) / Telefunken M60 / AKG c426b / AKG c414 xls / AKG c414 B-XLS / AKG c460b (ck61,ck62,ck63,ck69,a60,ck1,ck22,ck3,ck8,Blue B6) / nBob AKG Actives>PFA/ nBob AKG Actives>nBox Platinum / Naiant AKG Actives>PFA / AT853 w/ 4.7k Mod (Card,Omni,Sub)
Pre-Amps: Sonosax SX-M2 / Lunatec V3
Recs: Sound Devices MixPre-10T / Sound Devices MixPre-6 / Sony PCM-M10 / Roland R-07

My Recordings: https://archive.org/search.php?query=taper%3A%28Gakidis%29&sort=-date

Offline tgakidis

  • Trade Count: (540)
  • Needs to get out more...
  • *****
  • Posts: 5665
  • Gender: Male
    • My Recordings on the Archive:
Re: R-09HR external power
« Reply #51 on: May 05, 2011, 08:59:02 AM »
One thing to keep in mind regardless of what external battery source you use is that there is no seamless switch to internal batteries when the external runs out.  There is when you plug in or unplug an external source but when the external sources runs out while plugged in the unit will turn off.
GAKables: Custom XLR, Digi & Batt Cables http://taperssection.com/index.php?topic=133186.0

Mics: Telefunken RFT AR-51 / Telefunken ELA M 260 (tk60,tk61,tk62) / Telefunken M60 / AKG c426b / AKG c414 xls / AKG c414 B-XLS / AKG c460b (ck61,ck62,ck63,ck69,a60,ck1,ck22,ck3,ck8,Blue B6) / nBob AKG Actives>PFA/ nBob AKG Actives>nBox Platinum / Naiant AKG Actives>PFA / AT853 w/ 4.7k Mod (Card,Omni,Sub)
Pre-Amps: Sonosax SX-M2 / Lunatec V3
Recs: Sound Devices MixPre-10T / Sound Devices MixPre-6 / Sony PCM-M10 / Roland R-07

My Recordings: https://archive.org/search.php?query=taper%3A%28Gakidis%29&sort=-date

 

RSS | Mobile
Page created in 0.158 seconds with 34 queries.
© 2002-2019 Taperssection.com
Powered by SMF