Become a Site Supporter and Never see Ads again!

Author Topic: ART II Phantom Power Concern  (Read 1295 times)

0 Members and 1 Guest are viewing this topic.

Offline ksg4299

  • Trade Count: (6)
  • Taperssection Newbie
  • *
  • Posts: 41
  • The blues had a baby & they called it rock & roll
ART II Phantom Power Concern
« on: May 10, 2009, 09:47:30 PM »
new to the board and had a concern about a short-term fix to power my mics....i'll be purchasing a pmd-661 or edirol r-44, but the finances are tight after recently buying some peluso cemc-6's...can i SAFELY use the ART II box i already have to power these mics with the setup mentioned below.....

peluso cemc-6's > canare cables > ART II > 5' Hosa YXF-305 (F-XLR to right angle 3.5mm, no transformers) > edirol r-09

any danger to the mics?
any danger to the recorder?

i've searched the board for old threads about the above topic, but didn't see this exact setup referenced, so i just want to make sure that i don't jeopardize my investments.

thanks for any insight you can provide.....this site has already been a truly amazing experience for me
Peluso CEMC-6-MP (ck-2, 4, 21, 41)   Avenson STO-2-MP   Rode NT-4   CA- 14's   CA-11's   CA-1's   Shure SM7B
CA -9200   Sound Devices 302   R-05   R-09   PMD661-WMOD

Offline sunjan

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2004
  • Gender: Male
  • Taping since 1988, 28 years of fine recordings...
    • Just a handful of stuff I put on etree
Re: ART II Phantom Power Concern
« Reply #1 on: May 19, 2009, 05:20:19 AM »
The Pelusos are standard P48, I see no reason why you shouldn't:
http://www.pelusomicrophonelab.com/CEMC6Photos.html

Mics: A-51s LE, CK 930, Line Audo CM3, AT853Rx (hc,c,sc),  ECM 121, ECM 909A
Pres: Tinybox, CA-9100, UA5 wmod
Recorders: M10, H116 (CF mod), H340, NJB3
Gearbag: High Sierra Corkscrew
MD transfers: MZ-RH1. Tape transfers: Nak DR-1
Photo rig: Nikon D70, 18-70mm/3.5-4.5, SB-800

Offline ksg4299

  • Trade Count: (6)
  • Taperssection Newbie
  • *
  • Posts: 41
  • The blues had a baby & they called it rock & roll
Re: ART II Phantom Power Concern
« Reply #2 on: May 19, 2009, 05:52:30 PM »
thanks...just wanted to make sure the balanced out of the phantom box to the unbalanced input on my r-09 is safe
Peluso CEMC-6-MP (ck-2, 4, 21, 41)   Avenson STO-2-MP   Rode NT-4   CA- 14's   CA-11's   CA-1's   Shure SM7B
CA -9200   Sound Devices 302   R-05   R-09   PMD661-WMOD

Offline su6oxone

  • Trade Count: (38)
  • Needs to get out more...
  • *****
  • Posts: 2756
Re: ART II Phantom Power Concern
« Reply #3 on: May 23, 2009, 11:56:56 AM »
thanks...just wanted to make sure the balanced out of the phantom box to the unbalanced input on my r-09 is safe

Yep, no problems with that AFAIK.  I do it with CMC6>PS-2 (phantom unit)>miniplug on R-09HR.

 

RSS | Mobile
Page created in 0.132 seconds with 31 queries.
© 2002-2019 Taperssection.com
Powered by SMF