Become a Site Supporter and Never see Ads again!

Author Topic: Nackamichi cM-300 to Nackamichi MX-100 What to do now?  (Read 1498 times)

0 Members and 1 Guest are viewing this topic.

Offline scotchman 732

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 6
Nackamichi cM-300 to Nackamichi MX-100 What to do now?
« on: June 04, 2009, 10:43:02 AM »
I have bought both of the NAK Mics and NAK Mixer.  It looks like I need a power source for the mixer.  Any suggestions? 

Offline rsimms3

  • Trade Count: (10)
  • Taperssection All-Star
  • ****
  • Posts: 1489
Re: Nackamichi cM-300 to Nackamichi MX-100 What to do now?
« Reply #1 on: June 04, 2009, 11:19:08 AM »
Do a search, there has been discussion and success with modding the mixer to use two 9v batteries.
FOR SALE - Check HERE

Offline SmokinJoe

  • Trade Count: (63)
  • Needs to get out more...
  • *****
  • Posts: 4203
  • Gender: Male
  • "75 and sunny"... life is so much simpler.
    • uploads to archive.org
Re: Nackamichi cM-300 to Nackamichi MX-100 What to do now?
« Reply #2 on: June 04, 2009, 12:29:17 PM »
If you don't find anything, email me at the address in my profile.  I'm pretty sure I took some pictures showing what wires go where.
Mics: Schoeps MK4 & CMC5's / Gefell M200's & M210's / ADK-TL / DPA4061's
Pres: V3 / ST9100
Decks: Oade Concert Mod R4Pro / R09 / R05
Big Rig: split snake > Focusrite & Presonus Pres > ADAT > Alesis HD-24 > Protools 11
Daughter's rig:  AT4050ST > Busman Hybrid R4
Photo: Nikon D700's, 2.8 Zooms, and Zeiss primes
Playback: Raspberry Pi > Modi2 Uber > Magni2 > HD650

Offline SmokinJoe

  • Trade Count: (63)
  • Needs to get out more...
  • *****
  • Posts: 4203
  • Gender: Male
  • "75 and sunny"... life is so much simpler.
    • uploads to archive.org
Re: Nackamichi cM-300 to Nackamichi MX-100 What to do now?
« Reply #3 on: June 04, 2009, 09:43:29 PM »
I found my old post with pictures and some verbal instructions.

http://taperssection.com/index.php/topic,61569.195.html
Mics: Schoeps MK4 & CMC5's / Gefell M200's & M210's / ADK-TL / DPA4061's
Pres: V3 / ST9100
Decks: Oade Concert Mod R4Pro / R09 / R05
Big Rig: split snake > Focusrite & Presonus Pres > ADAT > Alesis HD-24 > Protools 11
Daughter's rig:  AT4050ST > Busman Hybrid R4
Photo: Nikon D700's, 2.8 Zooms, and Zeiss primes
Playback: Raspberry Pi > Modi2 Uber > Magni2 > HD650

Offline Roger Gustavsson

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 423
Re: Nackamichi cM-300 to Nackamichi MX-100 What to do now?
« Reply #4 on: June 05, 2009, 01:19:38 PM »
I think you can put two 9V batteries inside the enclosure of the MX-100. They use to last for at least 10 hours. You can also use some rechargeable ones and use the existing DIN-connector for an external charger.

There are a lot of things you can change in the setup of 3x Nakamichi microphones and the MX-100. You can supply the microphones from the mixer if you like. You will need to bypass the output transformers inside the microphones, replace the 2-way jacks on the MX-100 with 3-way ones. The third wire supplies the microphones. You can also replace the heavy enclosure of the MX-100 with a lighter and smaller one (but that still can take a pair of batteries inside). As the MX-100 have no balanced inputs, use short cables to the microphones. If you have a recorder/soundcard with balanced inputs, you can modify the MX-100 to balanced outputs.

Roger

 

RSS | Mobile
Page created in 0.035 seconds with 46 queries.
© 2002-2020 Taperssection.com
Powered by SMF