Become a Site Supporter and Never see Ads again!

Author Topic: When running pre >mini me  (Read 1148 times)

0 Members and 1 Guest are viewing this topic.

Offline Kindguy

  • Team Bama
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 6392
  • Gender: Male
When running pre >mini me
« on: August 19, 2009, 02:46:52 AM »
Do you have to adjust levels with the little screwdriver pots? I'd be running psp-2, V2 or the wendt.

Mark always joked about using the little screwdriver. But I've never touched those screws with the mme, ad500 or the 1K.

BTW The wendt rocks with the 140's IMO.

Thanks
jeff
TDS!

DPA 4023> aeta PSP-2> Apogee Mini Me > R-44

http://www.basicallyfrightened.com/

Offline Kindguy

  • Team Bama
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 6392
  • Gender: Male
Re: When running pre >mini me
« Reply #1 on: August 19, 2009, 04:03:36 AM »
Found my own answer.

http://taperssection.com/index.php/topic,13843.0.html

If anyone is curious.
TDS!

DPA 4023> aeta PSP-2> Apogee Mini Me > R-44

http://www.basicallyfrightened.com/

Offline skaggs

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 362
  • Gender: Male
Re: When running pre >mini me
« Reply #2 on: August 21, 2009, 12:49:58 AM »
you have to get a feel for it and do like a 1/4 turn at a time each side back and forth back and forth.  if you are not careful, you'll spike one side or the other.  good thing about the mme is the head room.  since i got a p2 i don't break the mme out very often, but i ran the screwdriver a long time.  i am actually thinking about breaking it out tomorrow  for los lobos.  good luck, imho the minime a/d can't be beat. 

richard

 

RSS | Mobile
Page created in 0.033 seconds with 44 queries.
© 2002-2020 Taperssection.com
Powered by SMF