Well hopefully his turned out a little better...
Oh right, back on topic
Doing some more testing for calibration I noticed some very interesting key things....there are 3 entirely different levels for line outs I am getting. One with the UA-5 RCA's out with the Monitor SW on....one with the UA-5 RCA's out with Monitor SW off and one out of the JB3 line out. There is an about 5 db difference between the UA-5 RCA outs when the Monitor SW light is on and off. This is when the UA-5 has the output knob maxed out...if it isn't maxed out the output levels go down as you turn it down.
The line out of JB3 is significally lower than both of those(also the headphone jack on the UA-5 when turned to max is pretty close to the line out...maybe only 1 db more). Gonna do some exact tone tests with exact levels recorded to the JB3 and will come back with exact numbers on the differences between the line outs. But for now just make sure whichever method of line out you choose you keep it constant and don't assume they are all the same.
The other test I did was regarding battery life and if that effects the lights at all as it drains. Initial tests say no it does not which is a very good thing of course. Although when the battery was getting really low, close to dead it was doing funky things to the lights(like 2 or 3 of the reds at the top going on at same time).
Oh yeah, pics soon!